Two Tone / 31 products
Headphones
Hi-fi, studio and wireless headphones, earphones, amps and DACs.
In stock · Free UK delivery. Online ordering opens soon.
25–31 of 31 products
Focal
Focal Azurys Blue Closed-Back Headphones
Passive closed-back wired design
The Focal Azurys is a passive wired headphone in a blue finish, designed for listening at home or while travelling with a suitable audio source. Its closed-back earcups use 40 mm aluminium and magnesium drivers with Focal’s M-shaped dome construction. The closed enclosure helps separate listening from surrounding sound, but this is not an active noise-cancelling or Bluetooth headphone. A 3.5 mm analogue connection links it to compatible equipment, and its specified impedance is 26 ohms. A source without an analogue headphone socket will need an appropriate external adapter or DAC. The magnesium yoke and padded headband support everyday handling and fit. This listing supplies the Azurys headphones, rather than a player or amplifier. The gallery shows the exact blue model and its carrying case; standalone cable and stylised scene photographs have been omitted.
FiiO
FiiO FT5 Black Open-Back Planar Headphones
Open-back planar magnetic headphone
The FiiO FT5 is a black wired headphone using an open-back planar magnetic design. Its 90 mm drivers employ a PAR diaphragm and aluminium-alloy coils, rather than the dynamic driver construction found in many conventional headphones. The manufacturer specifies 36-ohm impedance and quotes sensitivity with separate voltage and power references; those figures should not be mixed when comparing equipment. The open earcups allow sound to escape, making this model better suited to a quiet listening space than a noisy commute or a shared recording position. It has no Bluetooth, battery or active noise cancellation. A compatible headphone output is required, and amplifier capability should be considered alongside impedance and desired listening level. The detachable cable system supports the supplied connector arrangement, but source compatibility still matters. This listing contains the FT5 headphones, with five clean views of the exact model retained.
Pioneer DJ
Pioneer DJ HDJ-X10-K Black Wired DJ Headphones
Black HDJ-X10-K over-ear wired model
The Pioneer DJ HDJ-X10-K is a black over-ear wired headphone designed for DJ monitoring. Its fifty-millimetre drivers have a manufacturer-stated frequency range of five hertz to forty kilohertz; that extended range is not a promise that every frequency is audible. The closed earcups and swivel mechanism support flexible listening positions when cueing tracks and checking a mix. A detachable cable makes replacement possible without replacing the entire headphone, and the supplied one-point-two-metre coiled cable and one-point-six-metre straight cable provide different working options. The ear pads and headband cushion use coated polyurethane leather that can be wiped clean according to the care instructions. A flat carrying case is included for storage and transport. This is the black HDJ-X10-K, not the silver variant, and it is a wired-only model: no Bluetooth connection, wireless transmitter or battery runtime is claimed. Connected audio equipment is required, and replacement cables and pads beyond the supplied accessories are sold separately.
Bowers & Wilkins
Bowers & Wilkins Pi8 Wireless Earbuds — Anthracite Black
Anthracite Black true wireless Pi8 earbuds
The Bowers & Wilkins Pi8 in Anthracite Black is a pair of true wireless earbuds with a 12mm Carbon Cone driver in each earpiece. Active noise cancellation reduces background sound, while Ambient Pass-Through lets outside audio reach the listener when required. Bluetooth 5.4 supports aptX Lossless, aptX Adaptive, aptX Classic, AAC and SBC; the available codec and audio quality depend on the connected source. The earbuds provide up to 6.5 hours of listening with noise cancellation enabled, and the charging case adds up to 13.5 hours for a combined maximum of 20 hours under the manufacturer test conditions. The smart case also retransmits audio from USB and analogue sources. Analogue connection uses the supplied 3.5mm-to-USB-C cable at the case USB-C socket; there is no separate 3.5mm socket on the case. Retransmission uses aptX Adaptive, not a promise of lossless audio from every source. IP54 protection applies to the earbuds only, not the charging case. Four ear-tip sizes, a charging cable and the audio cable are supplied.
Bose
Bose QuietComfort Ultra Earbuds (2nd Gen) — Black
Second-generation true wireless earbuds, black
The Bose QuietComfort Ultra Earbuds (2nd Gen) are true wireless in-ear headphones finished in black, supplied as a left and right pair with a wireless charging case. CustomTune adapts the listening response to the wearer, while adjustable noise cancellation and Aware listening modes provide alternatives for different surroundings. Bose Immersive Audio offers spatialised playback, and SpeechClarity processing is designed to reduce background interference during calls. Bluetooth multipoint allows switching between compatible connected devices, with settings and equalisation managed in the Bose app. Bose advertises up to six hours of playback with Immersive Audio switched off, or up to four hours with it enabled; real battery life varies with volume, settings and use. The case holds up to three additional full charges and also charges through USB-C. IPX4 splash resistance applies to the earbuds, not the charging case, and should not be described as waterproofing. The supplied fit kit includes three sizes of ear tips and three sizes of stability bands. A USB charging cable is included, but a mains power adaptor and wireless charging pad are not part of this listing.
Sennheiser
Sennheiser HD 490 PRO Open-Back Studio Headphones
Open-back circumaural studio design
The Sennheiser HD 490 PRO is a wired, open-back studio headphone designed for music production and mixing. Its circumaural ear cups use 38 mm dynamic transducers and are supplied with two different sets of ear pads, one for producing and one for mixing. Both sets are washable and replaceable, allowing the fit and listening presentation to be adapted to the task. The headphones have a nominal impedance of 130 ohms and weigh 260 g without the cable. Sennheiser specifies a transmission range of 5 Hz to 36,100 Hz at a minus-10 dB measurement threshold, rather than a flat-response claim across that entire range. This standard PRO package includes a 1.8-metre cable and a 3.5 mm to 6.3 mm jack adapter. It is not the PRO Plus package, so a case, spare headband pad and additional three-metre cable are not included. The open-back construction allows sound to pass through the ear cups and is intended for an appropriate listening environment rather than noise isolation.
Meze Audio
Meze Audio 105 AER Open-Back Headphones – Black
50 mm dynamic driver
The Meze Audio 105 AER is a wired, open-back over-ear headphone built around a 50 mm dynamic driver. Its black PC-ABS earcups are not walnut, despite the inherited wording in the donor page address. The construction combines cast zinc-alloy hardware, a spring-steel headband and a soft PU-leather headband covering, with deep velour ear pads and a self-adjusting fit. Meze specifies 42-ohm impedance and a frequency range of 5 Hz to 30 kHz. A detachable wired connection keeps cable replacement practical; a compatible headphone source is still required. The open cups allow sound leakage and do not block surrounding noise like a closed design. This is the 105 AER, not the wood-cup 109 PRO, and it does not include the stands, players or amplifiers shown in some lifestyle photography.