Two Tone / 28 products
PA speakers
Powered and portable PA speakers for gigs and events.
In stock · Free UK delivery. Online ordering opens soon.
1–24 of 28 products
RCF
RCF ART 935-A Powered PA Speaker — Single
15-inch powered PA speaker; one 220–240V unit
The RCF ART 935-A is a single powered PA speaker with a 15-inch woofer and a neodymium compression driver with a 3-inch voice coil. The 220–240V version is identified by RCF part number 13000682 and EAN 8024530019136. Its two-channel Class D amplifier provides 2100W peak output, split between 1400W for the woofer and 700W for the high-frequency section; these are peak figures, not a continuous or RMS rating. RCF specifies 133dB maximum SPL at one metre and 100° horizontal by 60° vertical coverage. FiRPHASE processing and Bass Motion Control manage phase behaviour and woofer excursion. Linear, Boost and Stage presets adapt the speaker to its application. A combination XLR/jack input accepts balanced or unbalanced signals, and an XLR output passes the signal onward. The polypropylene-composite cabinet has a 35mm pole socket, mounting points and carry handles, and weighs 24.6kg. This listing is for one mains-powered speaker, not a pair; mounting accessories are separate. Bluetooth streaming and battery operation are not features of this model.
Electro-Voice
Electro-Voice EVERSE 12 Black Battery-Powered PA Speaker
Single black12-inch battery-powered PA speaker
The Electro-Voice EVERSE 12 is a black battery-powered portable PA loudspeaker with a twelve-inch woofer and a titanium-diaphragm compression driver. Its built-in four-channel digital mixer includes effects, feedback suppression and ducking, with two XLR/TRS combination inputs, a stereo mini-jack connection and Bluetooth audio. The manufacturer lists a four-hundred-watt amplifier and a one-hundred-by-sixty-degree coverage pattern. A removable eighty-six-point-four-watt-hour lithium-ion battery supports use away from mains power. Electro-Voice states more than twelve hours of runtime at an average sound level of one hundred decibels with typical programme material, or more than six hours at maximum output before limit indication; these are different test conditions, not guaranteed runtimes for every event. The cabinet can be used upright or in its supported monitor positions. This listing is one speaker, not a pair, and no microphone, stand or optional weather cover is promised. Compatible sources and any additional event equipment are required.
QSC
QSC K12.2 12-inch Powered PA Loudspeaker
Single K12.2 powered12-inch PA loudspeaker
The QSC K12.2 is a single two-way powered loudspeaker with a 12-inch cone driver and a titanium-diaphragm compression driver. It uses a Class-D power module described by QSC as 2,000W; the official specification separately lists 1,800W low-frequency and 225W high-frequency peak output, not RMS ratings. QSC rates the maximum SPL at 132dB peak, measured on-axis at one metre with dynamic pink noise. Its frequency response is 50Hz to 20kHz at −6dB, while the wider frequency range is 45Hz to 20kHz at −10dB. The two figures are not interchangeable. Two locking XLR/TRS combo inputs support microphone/line and high-impedance/line sources, and a separate 3.5mm stereo input accepts a wired playback device. Two XLR thru outputs and a mixed XLR output support routing to other equipment. Onboard DSP offers presets and saved scenes with EQ, delay and input settings, controlled from the rear display. The ABS enclosure can serve as a main PA speaker or floor monitor, with straight or 7.5-degree down-tilted pole mounting. A variable-speed fan provides cooling. Net weight is 17.7kg. This is one speaker, not a stereo pair; mounting hardware, stand, tote and cover are optional rather than included.
RCF
RCF ART 932-A Powered PA Speaker — Single
12-inch powered PA speaker; one 220–240V unit
The RCF ART 932-A is a single powered PA speaker with a 12-inch woofer and a neodymium compression driver with a 3-inch voice coil. The 220–240V version is identified by RCF part number 13000680 and EAN 8024530019112. Its two-channel Class D amplifier provides 2100W peak output, split between 1400W for the woofer and 700W for the high-frequency section; these are peak figures, not a continuous or RMS rating. RCF specifies 132dB maximum SPL at one metre and 100° horizontal by 60° vertical coverage. FiRPHASE processing and Bass Motion Control manage phase behaviour and woofer excursion. Linear, Boost and Stage presets adapt the speaker to its application. A combination XLR/jack input accepts balanced or unbalanced signals, and an XLR output passes the signal onward. The polypropylene-composite cabinet has a 35mm pole socket, mounting points and carry handles, and weighs 19.2kg. This listing is for one mains-powered speaker, not a pair; mounting accessories are separate. Bluetooth streaming and battery operation are not features of this model.
Pioneer DJ
Pioneer DJ XPRS122
12-inch active full-range loudspeaker
The Pioneer DJ XPRS122 is a twelve-inch full-range active loudspeaker in the XPRS2 series, combining amplification and digital signal processing within a protective plywood cabinet. It can form part of a mobile DJ system, live-performance PA or fixed sound setup. A twelve-inch woofer works alongside a compression driver with a one-inch exit, while the published frequency response spans 48 Hz to 20 kHz. Pioneer DJ specifies a maximum SPL of 131 dB. Four DSP presets cover Live, Music, Speech and Studio Monitoring applications, and sixteen custom user modes allow personalised settings to be saved with names. A carrying handle and rubber feet support transport and positioning. The speaker requires suitable mains power and audio connections; it is not a battery-powered portable system. Select additional speakers or subwoofers according to the requirements of the venue.
QSC
QSC K10.2 10-inch Active PA Loudspeaker
Single K10.2 powered loudspeaker with 10-inch woofer
The QSC K10.2 is a single two-way active PA loudspeaker built around a 10-inch cone woofer and a compression driver with a 1.4-inch titanium diaphragm. QSC specifies a Class-D amplifier with 1,800W peak output for low frequencies and 225W peak for high frequencies; these figures are peak ratings rather than continuous amplifier output. Its maximum rated sound pressure level is 130dB peak, measured on-axis at one metre with dynamic pink noise. Frequency response is 56Hz to 20kHz at −6dB, while the wider frequency range is 50Hz to 20kHz at −10dB. Nominal axisymmetric coverage is 90 degrees. Two locking XLR/TRS combination inputs provide selectable MIC/LINE and HI-Z/LINE operation, and a separate 3.5mm stereo input has its own level control. Two XLR throughput outputs and one mixed XLR output support connection to additional equipment. Factory presets, user EQ, delay and saved scenes are accessed through the LCD and controls. The impact-resistant ABS cabinet supports main-PA or floor-monitor use, with dual pole cups for straight or 7.5-degree downward tilt and integrated M10 mounting fittings. QSC specifies a universal 100–240V AC, 50–60Hz supply with a locking IEC power connection and variable-speed fan cooling. Cabinet dimensions are 519 × 320 × 300mm and net weight is 14.5kg. This is one speaker, not a pair; covers, yokes and other mounting accessories are optional rather than promised included.
QSC
QSC K8.2 8-inch Active PA Loudspeaker
Single K8.2 powered loudspeaker with 8-inch woofer
The QSC K8.2 is a single two-way active PA loudspeaker built around a 8-inch cone woofer and a compression driver with a 1.4-inch titanium diaphragm. QSC specifies a Class-D amplifier with 1,800W peak output for low frequencies and 225W peak for high frequencies; these figures are peak ratings rather than continuous amplifier output. Its maximum rated sound pressure level is 128dB peak, measured on-axis at one metre with dynamic pink noise. Frequency response is 59Hz to 20kHz at −6dB, while the wider frequency range is 55Hz to 20kHz at −10dB. Nominal axisymmetric coverage is 105 degrees. Two locking XLR/TRS combination inputs provide selectable MIC/LINE and HI-Z/LINE operation, and a separate 3.5mm stereo input has its own level control. Two XLR throughput outputs and one mixed XLR output support connection to additional equipment. Factory presets, user EQ, delay and saved scenes are accessed through the LCD and controls. The impact-resistant ABS cabinet supports main-PA or floor-monitor use, with dual pole cups for straight or 7.5-degree downward tilt and integrated M10 mounting fittings. QSC specifies a universal 100–240V AC, 50–60Hz supply with a locking IEC power connection and variable-speed fan cooling. Cabinet dimensions are 449 × 280 × 269mm and net weight is 12.2kg. This is one speaker, not a pair; covers, yokes and other mounting accessories are optional rather than promised included.
Electro-Voice
Electro-Voice EVERSE 8
Rechargeable removable battery: 12+ hours at 95 dB average; 6+ hours at maximum output
The Electro-Voice EVERSE 8 is an eight-inch portable PA speaker with a rechargeable, removable battery and an integrated four-channel mixer. Designed for mobile performances and spoken-word events, it combines microphone and line inputs with Bluetooth playback and app control. Dynacord-powered processing provides effects and sound-shaping tools, while wireless stereo linking supports a compatible two-speaker setup. Battery duration depends on volume and programme material: Electro-Voice quotes more than twelve hours at an average 95 dB SPL with typical programme, or more than six hours at maximum output before limit indication. IP43 splash protection applies only with the supplied weatherised input cover, battery operation and Bluetooth streaming. It is not waterproof, and wired connections must not be treated as weather-protected. The speaker provides 100-degree by 100-degree coverage and a maximum SPL of 121 dB.
Bose
Bose S1 Pro+ Portable PA System
Portable PA with an integrated three-channel mixer
The Bose S1 Pro+ is a portable powered PA system with an integrated three-channel mixer for performances, speech and music playback. Microphones and instruments can connect to the system, while Bluetooth streaming provides a convenient way to play backing tracks or a playlist. It can run from mains power or the included battery, with Bose specifying up to 11 hours of playback depending on use and listening conditions. The cabinet can stand on an elevated surface, tilt back towards a nearby audience, work as a floor monitor or mount on a speaker stand. Auto EQ adapts the sound to its position. Channels 1 and 2 provide adjustable tone and reverb settings, with rotating OLED displays and additional control through the Bose app. Integrated wireless receivers support optional Bose microphone or instrument transmitters; those transmitters are not included with this standard speaker. The package includes the speaker with battery and an AC power cable. A carry handle assists transport, while USB-C Live Stream mode sends a dual-mono mix to a connected computer for recording or online performance.
RCF
RCF ART 715-A MK5 15-inch Active PA Loudspeaker
Single black 220–240V ART 715-A MK5 speaker
The RCF ART 715-A MK5 is a single two-way active PA loudspeaker combining a 15-inch woofer with a 1-inch-exit compression driver using a 1.75-inch voice coil. This black 220–240V version is identified by manufacturer part 13000824 and EAN 8024530021467. RCF specifies 1,400W peak total amplifier output, split into 1,000W peak for the low-frequency section and 400W peak for the high-frequency section. The current official page and portable catalogue give peak ratings rather than an RMS output, so no continuous-power figure is claimed. Maximum SPL is 130dB at one metre. The stated frequency response is 45Hz to 20kHz, without an accompanying tolerance, and nominal coverage is 90 degrees horizontally by 60 degrees vertically. FiRPHASE processing and selectable XBOOST bass enhancement support full-range reproduction. Wired XLR and jack inputs, an XLR output, volume, Boost and MIC/Line controls provide integration with a mixer or microphone source. The polypropylene-composite cabinet has a steel grille, top and side handles, a 35mm pole insert and two M10 mounting points. It can be used upright or as a floor monitor. Manufacturer dimensions are 708 × 437 × 389mm, with a 19.6kg net weight. This is one loudspeaker, not a pair or a bundle with stands, cables or covers; mounting accessories are not promised as included.
Electro-Voice
Electro-Voice ZLX-15P-G2 Powered PA Speaker — Single
15-inch powered two-way PA speaker, sold singly
The Electro-Voice ZLX-15P-G2 is a single powered two-way PA speaker with a 15-inch woofer and a 1.4-inch titanium compression driver. Its Class D amplifier is rated at 1000W peak in the manufacturer brochure, not 1000W continuous or RMS. Electro-Voice specifies 129dB maximum SPL, with a 48Hz to 18kHz frequency response at minus 3dB and a wider 42Hz to 20kHz range at minus 10dB. These ranges describe different measurement tolerances and should not be interchanged. A built-in Dynacord digital mixer provides effects, equalisation, automatic feedback suppression and ducking. Two XLR/TRS combination inputs and a quarter-inch Hi-Z input connect wired sources, while an XLR mix output feeds another speaker. Bluetooth supports stereo audio streaming and true wireless stereo linking with a compatible second cabinet; the QuickSmart Mobile app provides wireless configuration and control. The polypropylene cabinet offers a 55-degree monitor position and a 23-degree kickback position. It weighs 16.78kg and requires mains power. This listing contains one loudspeaker, not a stereo pair; stands, covers and a second cabinet are separate.
Electro-Voice
Electro-Voice ELX200-10P 10-Inch Powered PA Speaker
10-inch woofer and 1-inch compression driver
The Electro-Voice ELX200-10P is a powered, full-range two-way loudspeaker for portable and installed sound systems. Its 10-inch EVS-10M woofer works with a DH-1L 1-inch titanium compression driver, supported by a Class D amplifier specified at up to 1,200 W. The manufacturer does not identify that wattage as a continuous rating in the cited product description, so no peak-to-RMS conversion is assigned. QuickSmartDSP provides Music, Live, Speech and Club presets, three-band EQ and system-match crossover settings. Input-level controls, metering and master-volume adjustment help configure the speaker for the source and room. QuickSmart app connectivity is for control, not a promise of Bluetooth music streaming, and availability may vary by region. This listing contains one mains-powered speaker rather than a pair, subwoofer or complete PA bundle.
RCF
RCF ART 712-A MK5 12-inch Active PA Loudspeaker
Single black 220–240V ART 712-A MK5 speaker
The RCF ART 712-A MK5 is a single two-way active PA loudspeaker combining a 12-inch woofer with a 1-inch-exit compression driver using a 1.75-inch voice coil. This black 220–240V version is identified by manufacturer part 13000823 and EAN 8024530021450. RCF specifies 1,400W peak total amplifier output, split into 1,000W peak for the low-frequency section and 400W peak for the high-frequency section. The current official page and portable catalogue give peak ratings rather than an RMS output, so no continuous-power figure is claimed. Maximum SPL is 129dB at one metre. The stated frequency response is 50Hz to 20kHz, without an accompanying tolerance, and nominal coverage is 90 degrees horizontally by 60 degrees vertically. FiRPHASE processing and selectable XBOOST bass enhancement support full-range reproduction. Wired XLR and jack inputs, an XLR output, volume, Boost and MIC/Line controls provide integration with a mixer or microphone source. The polypropylene-composite cabinet has a steel grille, top and side handles, a 35mm pole insert and two M10 mounting points. It can be used upright or as a floor monitor. Manufacturer dimensions are 637 × 387 × 363mm, with a 17.8kg net weight. This is one loudspeaker, not a pair or a bundle with stands, cables or covers; mounting accessories are not promised as included.
RCF
RCF ART 910-A 10-inch Active PA Loudspeaker
Single black 220–240V ART 910-A loudspeaker
The RCF ART 910-A is a single two-way active PA loudspeaker with a 10-inch woofer and a compression driver featuring a 1-inch exit and 1.75-inch voice coil. This black 220–240V version is identified by manufacturer part 13000654 and EAN 8024530019303. Its Class-D amplifier provides 2,100W total peak power, comprising 1,400W peak for low frequencies and 700W peak for high frequencies. RCF specifies a maximum sound pressure level of 130dB at one metre, a frequency response of 50Hz to 20kHz and 100° × 60° horizontal-by-vertical coverage. FiRPHASE and Bass Motion Control woofer-excursion processing supports the loudspeaker’s full-range output. Wired XLR and jack inputs, an XLR output and Linear, Boost, Stage and Volume controls allow connection and adjustment for the application. The polypropylene-composite enclosure has a steel grille, a top handle, a 35mm pole insert and M10 mounting provisions. Cabinet dimensions are 572 × 330 × 310mm and net weight is 15.8kg. This listing is for one loudspeaker, not a pair. Stands, covers, external mounting hardware and other accessories are not promised as included.
RCF
RCF ART 710-A MK5 10-inch Active PA Loudspeaker
Single black 220–240V ART 710-A MK5 loudspeaker
The RCF ART 710-A MK5 is a single two-way active PA loudspeaker with a 10-inch woofer and a compression driver featuring a 1-inch exit and 1.75-inch voice coil. This black 220–240V version is identified by manufacturer part 13000822 and EAN 8024530021443. Its Class-D amplifier provides 1,400W total peak power, comprising 1,000W peak for low frequencies and 400W peak for high frequencies. RCF specifies a maximum sound pressure level of 129dB at one metre, a frequency response of 50Hz to 20kHz and 90° × 70° horizontal-by-vertical coverage. FiRPHASE processing and selectable XBOOST bass enhancement supports the loudspeaker’s full-range output. Wired XLR and jack inputs, an XLR output and Volume, Boost and MIC/Line controls allow connection and adjustment for the application. The polypropylene-composite enclosure has a steel grille, a top handle, a 35mm pole insert and M10 mounting provisions. Cabinet dimensions are 548 × 340 × 305mm and net weight is 14.2kg. This listing is for one loudspeaker, not a pair. Stands, covers, external mounting hardware and other accessories are not promised as included.
Electro-Voice
Electro-Voice ZLX-12P-G2
12-inch two-way powered loudspeaker with 90° x 60° coverage
The Electro-Voice ZLX-12P-G2 is a powered 12-inch two-way loudspeaker for live performances, DJ playback and speech. Its built-in digital mixer brings audio connections and sound shaping together within the cabinet, making it useful when a compact setup is preferable to a separate mixer. Dynacord-powered processing includes effects, equalisation, feedback suppression and ducking. Two XLR/TRS combination inputs and a dedicated instrument input provide options for connecting microphones and compatible sources. Bluetooth stereo streaming supports music playback, while QuickSmart Mobile offers remote control of speaker settings. The cabinet can be positioned for main PA or stage-monitor use. It requires mains power; wireless audio streaming does not make it a battery-powered speaker. Electro-Voice specifies a maximum sound pressure level of 127 dB and 90-degree by 60-degree coverage.
Mackie
Mackie Thump212XT 12-inch Bluetooth Powered PA Speaker
Single12-inch powered PA speaker with Bluetooth
The Mackie Thump212XT is a single twelve-inch powered PA loudspeaker with a one-inch polymer compression driver and Class-D amplification rated at one thousand four hundred watts peak. The XT model adds Bluetooth music streaming, compatible speaker linking and remote control through the Thump Connect 2 application. Four voicing modes cover Music, Live, Club and Monitor use, with an Indoor or Outdoor setting for different environments. Music Ducking can reduce channel two when a microphone signal reaches channel one, and the Feedback Eliminator helps control unwanted acoustic feedback. The input section provides microphone or line connection on channel one, line-level and stereo auxiliary connections on channel two, and an XLR thru output carrying the mixed signal. The manufacturer manual specifies a frequency range of forty-seven hertz to twenty-three kilohertz at minus ten decibels and fifty-four hertz to twenty kilohertz at minus three decibels. Bluetooth links do not mean that a second loudspeaker is included. This selection is one mains-powered speaker, not a pair, battery system or installation kit; stands, rigging hardware, microphones and audio cables are separate.
Mackie
Mackie Thump215 15-inch Powered PA Speaker
Single15-inch powered PA speaker
The Mackie Thump215 is a single powered PA loudspeaker with a fifteen-inch woofer and a one-inch polymer compression driver. Its Class-D amplification is rated at one thousand four hundred watts peak, not continuous RMS power, with a maximum peak sound-pressure level of one hundred and twenty-nine decibels. The built-in two-channel mixer accepts a microphone or line signal on channel one, with line-level and stereo auxiliary inputs on channel two. Music Ducking lowers channel two when a microphone signal is received on channel one, while the Feedback Eliminator helps suppress unwanted feedback. A mixed XLR thru output can feed another suitable speaker. This standard Thump215 model does not include the Bluetooth streaming, wireless speaker linking or application-specific voicing controls of the XT series. The cabinet can stand upright or serve as a floor monitor and has a pole-mount socket. Mackie expressly states that the standard model has no rigging points and is not suitable for suspension. This selection is one loudspeaker; stands, microphones, audio cables, carrying bags and a second speaker are separate.
Mackie
Mackie Thump212 12-inch 1400W Powered PA Speaker
1400W peak Class-D amplifier, 12-inch woofer, 1-inch compression driver
The Mackie Thump212 is a 12-inch powered loudspeaker from the redesigned 2022 Thump range, aimed at mobile PA, DJs, bands, bars, schools and conference rooms. A 1400-watt peak Class-D amplifier drives a 12-inch woofer and a one-inch compression driver through an electronic crossover at 2.1 kilohertz. Mackie specifies a frequency response of 47 hertz to 23 kilohertz and a maximum sound pressure level of 128 decibels. The rear panel carries a two-channel mixer: channel one has an XLR and TRS combo input that accepts microphone or line signals, while channel two offers an XLR and TRS line input plus a stereo 3.5mm input for a phone or media player. A thru output passes a mix of both channels to another speaker. A built-in Feedback Eliminator helps reduce squeals and low-frequency rumble, and Music Ducking automatically lowers channel two whenever a signal arrives on channel one, which suits announcements over background music. The moulded cabinet includes a standard pole mount and an angled back for use as a floor wedge. The universal power supply accepts 100 to 240 volts. Mackie quotes a weight of 12.5kg. This is the standard Thump212 without the Bluetooth and app control of the Thump212XT.
Electro-Voice
Electro-Voice ZLX-8P-G2 Powered PA Speaker — Single
8-inch powered two-way PA speaker, sold singly
The Electro-Voice ZLX-8P-G2 is a single powered two-way PA speaker with an 8-inch woofer and a 1.4-inch titanium compression driver. Its Class D amplifier is rated at 1000W peak in the manufacturer brochure, not 1000W continuous or RMS. Electro-Voice specifies 126dB maximum SPL, with a 58Hz to 20kHz frequency response at minus 3dB and a wider 50Hz to 20kHz range at minus 10dB. These ranges describe different measurement tolerances and should not be interchanged. A built-in Dynacord digital mixer provides effects, equalisation, automatic feedback suppression and ducking. Two XLR/TRS combination inputs and a quarter-inch Hi-Z input connect wired sources, while an XLR mix output feeds another speaker. Bluetooth supports stereo audio streaming and true wireless stereo linking with a compatible second cabinet; the QuickSmart Mobile app provides wireless configuration and control. The polypropylene cabinet offers a 55-degree monitor position but no dedicated kickback position. It weighs 10.64kg and requires mains power. This listing contains one loudspeaker, not a stereo pair; stands, covers and a second cabinet are separate.
Yamaha
Yamaha DBR12 Powered PA Speaker — Single
12-inch powered bass-reflex PA speaker, sold singly
The Yamaha DBR12 is a single mains-powered PA speaker with a 12-inch woofer and a high-frequency compression driver. Its bi-amplified Class D system is rated at 1000W dynamic output and 465W continuous output; these are different ratings, not interchangeable figures. Yamaha specifies a maximum output of 131dB SPL at one metre on axis and a frequency range of 52Hz to 20kHz at minus 10dB. The cabinet can serve as a front-of-house speaker or a floor monitor using its 50-degree wedge position. D-CONTOUR provides main, monitor and off settings, while FIR-X tuning manages the crossover. A two-channel onboard mixer accepts a microphone or line source on the first combination input, with a second combination input and stereo RCA connections on channel two. The XLR output can pass channel one or the combined mix. A 35mm pole socket supports compatible mounting. This listing contains one speaker, not a pair or a stands-and-cables bundle. Bluetooth and battery operation are not provided; stands and audio cables are separate.
Alto Professional
Alto Professional TS415 15-Inch Powered PA Speaker
15-inch two-way powered loudspeaker
The Alto Professional TS415 is a powered two-way loudspeaker built around a 15-inch woofer and a high-frequency compression driver. Its amplifier is rated at 2,500 W peak and 1,250 W continuous RMS; these are different measurements and should not be treated as equivalent output figures. Two XLR/TRS combination inputs provide individual level controls and mic/line selection, while a third mixer channel handles Bluetooth audio. An XLR mix output allows a wired connection to additional equipment. Speaker Use presets help adapt the sound to the application, and the Alto app provides access to custom EQ and subwoofer settings. Two compatible TS4 speakers can link for Bluetooth stereo playback, rather than wirelessly forwarding every connected input. The cabinet supports pole mounting and wedge-monitor use. This listing is for one mains-powered speaker; stands, cables and a subwoofer are not included unless separately specified.
Alto Professional
Alto Professional TS412
2500W peak / 1250W continuous RMS Class-D amplification
The Alto Professional TS412 is a mains-powered, two-way 12-inch PA loudspeaker intended for live sound, DJ playback and monitoring. Its Class-D amplification is rated at 2500W peak (1600W LF + 900W HF) and 1250W continuous RMS (800W LF + 450W HF); these are distinct ratings, not interchangeable. The compression driver with a one-inch exit and 1.4-inch voice coil and 12-inch woofer are complemented by onboard DSP with four Speaker Use modes and app-adjustable custom EQ. Two XLR/TRS combo inputs, mic/line switching and an integrated three-channel mixer accommodate microphones, instruments and line sources, alongside Bluetooth audio streaming. The Alto app provides remote configuration, while True Wireless Stereo can send Bluetooth audio to a second TS4 speaker. Bluetooth does not make the speaker battery-powered: it requires mains power, and wired inputs remain available. An XLR output, pole mounting, wedge-monitor positioning and M10 suspension points offer flexible system placement.
Yamaha
Yamaha DBR10 Powered PA Speaker — Single
10-inch powered bass-reflex PA speaker, sold singly
The Yamaha DBR10 is a single mains-powered PA speaker with a 10-inch woofer and a high-frequency compression driver. Its bi-amplified Class D system is rated at 700W dynamic output and 325W continuous output; these are different ratings, not interchangeable figures. Yamaha specifies a maximum output of 129dB SPL at one metre on axis and a frequency range of 55Hz to 20kHz at minus 10dB. The cabinet can serve as a front-of-house speaker or a floor monitor using its 50-degree wedge position. D-CONTOUR provides main, monitor and off settings, while FIR-X tuning manages the crossover. A two-channel onboard mixer accepts a microphone or line source on the first combination input, with a second combination input and stereo RCA connections on channel two. The XLR output can pass channel one or the combined mix. A 35mm pole socket supports compatible mounting. This listing contains one speaker, not a pair or a stands-and-cables bundle. Bluetooth and battery operation are not provided; stands and audio cables are separate.