Two Tone / 290 products
The equipment
DJ equipment, studio essentials, live sound, home audio and headphones.
In stock · Free UK delivery. Online ordering opens soon.
73–96 of 290 products
SVS
SVS PB-1000 Pro Black Ash Active Subwoofer
Single ported active subwoofer
The SVS PB-1000 Pro is a single powered subwoofer with a Black Ash cabinet finish. Its ported enclosure contains a twelve-inch high-excursion driver driven by a Sledge amplifier rated at 325 watts RMS. The manufacturer’s higher peak-power figure is not a continuous output rating and should not replace the RMS specification. This is the PB-1000 Pro ported model, not the sealed SB-1000 Pro or the older PB-1000. RCA inputs support line-level and LFE connections, while the compatible SVS app provides control of settings from a supported mobile device. App communication is for setup and control, not Bluetooth music streaming. The listing supplies one subwoofer, with clean grille-on and grille-off product views and a rear-control detail. Phones, tablets and furnished-room equipment from donor gallery scenes are not included.
Technics
Technics SL-1500C (Black)
Coreless direct-drive motor
The Technics SL-1500C is a direct-drive turntable that combines manual record handling with a useful automatic tonearm lift. This black model uses a coreless motor and offers electronic selection of 33⅓, 45 and 78rpm. The supplied Ortofon 2M Red moving-magnet cartridge and built-in phono equaliser make it possible to connect to an appropriate line-level amplifier input without buying a separate phono stage. Alternatively, the dedicated phono connection supports a suitable external phono stage. At the end of a record, the enabled auto lift-up function raises the tonearm to prevent repeated playing of the run-out groove. It does not stop the platter, return the arm to its rest or make the turntable fully automatic. The user remains responsible for positioning the arm and finishing the playback sequence. Although 78rpm rotation is available, the supplied standard microgroove stylus should not be presented as suitable for every historic shellac record; a compatible specialist stylus or cartridge may be required.
DALI
DALI SONIK 5 Passive Floorstanding Speakers, Black Ash Pair
Black Ash pair of passive two-way floorstanding speakers
This pair of DALI SONIK 5 speakers brings a compact floorstanding design to a stereo or home cinema system. Each passive two-way cabinet combines two 5¼-inch low/mid drivers with a 29mm low-loss soft-dome tweeter. DALI uses its Clarity Cone technology and SMC magnet system in the drivers to support detailed reproduction with reduced distortion. The quoted frequency range is 39Hz to 26kHz within ±3dB, with 88dB sensitivity measured at 2.83V and one metre. A nominal impedance of 6 ohms and recommended amplifier power of 30–150W guide amplifier matching; these are not powered speakers and there is no built-in amplifier. The crossover operates at 2.2kHz and DALI specifies a maximum sound pressure level of 108dB at one metre. The Black Ash finish is supplied here as a pair. Connect both speakers to a suitable external amplifier using speaker cable, and allow room for positioning rather than treating the cabinets as self-contained wireless music systems.
RCF
RCF ART 935-A Powered PA Speaker — Single
15-inch powered PA speaker; one 220–240V unit
The RCF ART 935-A is a single powered PA speaker with a 15-inch woofer and a neodymium compression driver with a 3-inch voice coil. The 220–240V version is identified by RCF part number 13000682 and EAN 8024530019136. Its two-channel Class D amplifier provides 2100W peak output, split between 1400W for the woofer and 700W for the high-frequency section; these are peak figures, not a continuous or RMS rating. RCF specifies 133dB maximum SPL at one metre and 100° horizontal by 60° vertical coverage. FiRPHASE processing and Bass Motion Control manage phase behaviour and woofer excursion. Linear, Boost and Stage presets adapt the speaker to its application. A combination XLR/jack input accepts balanced or unbalanced signals, and an XLR output passes the signal onward. The polypropylene-composite cabinet has a 35mm pole socket, mounting points and carry handles, and weighs 24.6kg. This listing is for one mains-powered speaker, not a pair; mounting accessories are separate. Bluetooth streaming and battery operation are not features of this model.
Yamaha
Yamaha R-N800A Network Stereo Receiver – Black
100 W per channel into 8 ohms
The Yamaha R-N800A combines two-channel stereo amplification with network music playback in a Black receiver. Its rated output is 100 watts per channel into 8 ohms across 20 Hz to 20 kHz at 0.07% total harmonic distortion; separate dynamic-power figures are not presented as continuous output. MusicCast supports network listening, while YPAO room correction helps adjust the response to the listening environment. Optical and coaxial digital inputs and a USB-B DAC connection provide wired source options, alongside analogue inputs and a phono input for a suitable turntable. This is not an HDMI AV receiver and has no HDMI ARC socket. A stereo speaker pair, source cables and network access are separate requirements. It is not a surround amplifier, and no unsupported moving-coil phono compatibility is claimed.
Electro-Voice
Electro-Voice EVERSE 12 Black Battery-Powered PA Speaker
Single black12-inch battery-powered PA speaker
The Electro-Voice EVERSE 12 is a black battery-powered portable PA loudspeaker with a twelve-inch woofer and a titanium-diaphragm compression driver. Its built-in four-channel digital mixer includes effects, feedback suppression and ducking, with two XLR/TRS combination inputs, a stereo mini-jack connection and Bluetooth audio. The manufacturer lists a four-hundred-watt amplifier and a one-hundred-by-sixty-degree coverage pattern. A removable eighty-six-point-four-watt-hour lithium-ion battery supports use away from mains power. Electro-Voice states more than twelve hours of runtime at an average sound level of one hundred decibels with typical programme material, or more than six hours at maximum output before limit indication; these are different test conditions, not guaranteed runtimes for every event. The cabinet can be used upright or in its supported monitor positions. This listing is one speaker, not a pair, and no microphone, stand or optional weather cover is promised. Compatible sources and any additional event equipment are required.
Reloop
Reloop MIXON 8 Pro Four-Channel DJ Controller
Four-channel hybrid controller
The Reloop MIXON 8 Pro is a four-channel hybrid DJ controller with jog displays and dedicated effects paddles. Its built-in standalone mixer accepts external line and phono sources, while two microphone inputs support announcements or vocal use. Dual USB audio interfaces allow compatible computers to be connected for handovers. Controller functions depend on supported DJ software and a suitable host device; the standalone mixer does not mean that the unit can browse and play music from USB storage on its own. Software licences, subscriptions and mobile-device compatibility should be checked for the intended workflow rather than assumed from a photograph. This listing includes one controller, not the tablet shown in an illustrative donor image. Turntables, external players, headphones and speakers are separate items, and no unrestricted paid-software entitlement is promised.
Universal Audio
Universal Audio Apollo Twin X DUO Gen 2 Thunderbolt Audio Interface, UAD Analog Classics
10-in/6-out Thunderbolt interface
The Universal Audio Apollo Twin X DUO Gen 2 is a 10-in/6-out Thunderbolt desktop audio interface with built-in DUO Core DSP, supplied here with the UAD Analog Classics plug-in bundle. Its two Unison mic preamps take on the tone and response of classic analogue preamps from makers such as Neve, API and Manley when used with Unison plug-ins, and the onboard DSP lets you record through UAD plug-ins in real time. A front-panel Hi-Z input accepts guitar or bass, and an optical Toslink input adds ADAT or S/PDIF channels. On the rear are two 1/4" monitor outputs and two 1/4" line outputs that can be used as an alternate speaker pair, with a 1/4" TRS headphone output on the front. Apollo X Gen 2 conversion runs at up to 24-bit/192kHz, and Universal Audio quotes 129dB of dynamic range on the D/A. The updated UAD Console app adds Auto-Gain, Plug-In Scenes, bass management for a subwoofer and immersive audio support, and Apollo Monitor Correction by Sonarworks can calibrate the monitor and headphone outputs. A Thunderbolt-equipped computer is required.
DALI
DALI IO-12 Dark Chocolate Wireless Headphones
Closed-back wireless listening with ANC
The DALI IO-12 is a closed-back wireless headphone in the Dark Chocolate finish, combining active noise cancellation with wired connection options. Its 50 mm paper-fibre cone drivers use DALI’s SMC-based magnet system, a feature that distinguishes this model from the IO-8. Bluetooth 5.2 provides wireless playback from compatible devices, while USB-C and a 3.5 mm analogue input offer alternatives for suitable sources. The manufacturer quotes up to 35 hours of battery playback, with actual duration depending on use. The specified 25-ohm impedance applies to passive operation, not to the wireless connection. Selectable Hi-Fi and Bass modes let the listener choose between the available sound settings. This listing supplies one IO-12 headphone set, not the computers or home-audio equipment visible in lifestyle photography. Clean product angles are retained; exploded diagrams and room scenes are excluded.
Marantz
Marantz CD 60 Black CD Player
CD player with USB-storage playback
The Marantz CD 60 is a black CD player with analogue stereo and digital output connections. It plays standard audio CDs and supported recorded discs, while the front USB-A port provides playback of compatible files from USB storage. That port is not a USB input for using the player as a computer DAC. The CD 60 is not an SACD player, despite appearing in a broader CD/SACD product category on some manufacturer pages. Stereo RCA outputs allow connection to an amplifier, with optical and coaxial digital outputs for compatible external equipment. A front headphone connection provides another listening option. USB DSD playback uses the analogue outputs; it is not passed through the digital outputs. This listing supplies one player, not a matching amplifier or complete hi-fi system. Clean front and rear photographs show the exact black version. File and disc compatibility should be checked against the manufacturer’s manual for the formats you intend to use.
QSC
QSC K12.2 12-inch Powered PA Loudspeaker
Single K12.2 powered12-inch PA loudspeaker
The QSC K12.2 is a single two-way powered loudspeaker with a 12-inch cone driver and a titanium-diaphragm compression driver. It uses a Class-D power module described by QSC as 2,000W; the official specification separately lists 1,800W low-frequency and 225W high-frequency peak output, not RMS ratings. QSC rates the maximum SPL at 132dB peak, measured on-axis at one metre with dynamic pink noise. Its frequency response is 50Hz to 20kHz at −6dB, while the wider frequency range is 45Hz to 20kHz at −10dB. The two figures are not interchangeable. Two locking XLR/TRS combo inputs support microphone/line and high-impedance/line sources, and a separate 3.5mm stereo input accepts a wired playback device. Two XLR thru outputs and a mixed XLR output support routing to other equipment. Onboard DSP offers presets and saved scenes with EQ, delay and input settings, controlled from the rear display. The ABS enclosure can serve as a main PA speaker or floor monitor, with straight or 7.5-degree down-tilted pole mounting. A variable-speed fan provides cooling. Net weight is 17.7kg. This is one speaker, not a stereo pair; mounting hardware, stand, tote and cover are optional rather than included.
RCF
RCF ART 932-A Powered PA Speaker — Single
12-inch powered PA speaker; one 220–240V unit
The RCF ART 932-A is a single powered PA speaker with a 12-inch woofer and a neodymium compression driver with a 3-inch voice coil. The 220–240V version is identified by RCF part number 13000680 and EAN 8024530019112. Its two-channel Class D amplifier provides 2100W peak output, split between 1400W for the woofer and 700W for the high-frequency section; these are peak figures, not a continuous or RMS rating. RCF specifies 132dB maximum SPL at one metre and 100° horizontal by 60° vertical coverage. FiRPHASE processing and Bass Motion Control manage phase behaviour and woofer excursion. Linear, Boost and Stage presets adapt the speaker to its application. A combination XLR/jack input accepts balanced or unbalanced signals, and an XLR output passes the signal onward. The polypropylene-composite cabinet has a 35mm pole socket, mounting points and carry handles, and weighs 19.2kg. This listing is for one mains-powered speaker, not a pair; mounting accessories are separate. Bluetooth streaming and battery operation are not features of this model.
Optimal Audio
Optimal Audio Zone 4P Four-Zone Powered Audio Controller
Four zones with integrated DSP and amplification
The Optimal Audio Zone 4P combines four-zone audio routing, digital signal processing and four integrated amplifier channels in a two-unit rack controller. Each amplifier channel is rated at one hundred watts into four or eight ohms. Bridged operation is specified at two hundred watts into a minimum eight-ohm load or for seventy-volt applications; this is not a native one-hundred-volt output on every channel. Two microphone inputs provide forty-eight-volt phantom power, alongside four stereo line inputs and two HDMI inputs for television or video sound. The browser-based WebApp supports configuration, loudspeaker presets, programmable settings and timed events. Four line outputs allow connections to additional amplification where required. This is the powered Zone 4P rather than the unpowered Zone 4. Compatible loudspeakers, audio sources, network access and any optional ZonePad controllers are separate. Speaker loading and bridged connections must follow the manufacturer installation instructions.
Pioneer DJ
Pioneer DJ XPRS122
12-inch active full-range loudspeaker
The Pioneer DJ XPRS122 is a twelve-inch full-range active loudspeaker in the XPRS2 series, combining amplification and digital signal processing within a protective plywood cabinet. It can form part of a mobile DJ system, live-performance PA or fixed sound setup. A twelve-inch woofer works alongside a compression driver with a one-inch exit, while the published frequency response spans 48 Hz to 20 kHz. Pioneer DJ specifies a maximum SPL of 131 dB. Four DSP presets cover Live, Music, Speech and Studio Monitoring applications, and sixteen custom user modes allow personalised settings to be saved with names. A carrying handle and rubber feet support transport and positioning. The speaker requires suitable mains power and audio connections; it is not a battery-powered portable system. Select additional speakers or subwoofers according to the requirements of the venue.
Technics
Technics SL-1210MK7 Black Direct-Drive Turntable
Manual direct drive
The Technics SL-1210MK7 is a black manual direct-drive turntable for a wired vinyl listening or DJ setup. Its coreless motor and digital pitch control support hands-on operation, with 33⅓ and 45 rpm playback and a switchable 78 rpm mode. A phono output and earth terminal connect to suitable downstream equipment; this is not a USB recording deck or an all-in-one speaker system. The manufacturer lists a headshell and cartridge screw set, but does not include a cartridge. A suitable cartridge and stylus must therefore be selected separately, with an appropriate configuration required for 78 rpm records. This listing supplies one black turntable, not a pair. Suitable phono amplification, speakers and cables are also needed for a complete listening system.
JBL
JBL PartyBox 720 — Black, Single
800 W RMS under IEC 60268
The JBL PartyBox 720 is a party speaker finished in black, supplied in this listing without battery packs. It operates from mains power as supplied, and can also support battery playback when two compatible JBL Battery 600 packs are purchased separately. JBL advertises up to 15 hours with the required battery pair, depending on listening volume and audio content; that runtime is not available from the supplied package alone. The amplifier is rated at 800 W RMS under IEC 60268, with two woofers and two dome tweeters. Bluetooth and USB-C audio connect compatible music sources, while two XLR inputs support suitable microphones, instruments or a DJ console. Auracast links compatible speakers, with settings and lighting controlled through the JBL PartyBox app. IPX4 offers splash resistance rather than immersion protection. Wheels and an integrated handle assist transport. This listing contains one speaker and a mains cord, not a stereo pair, microphone bundle or battery-inclusive package.
Sennheiser
Sennheiser AMBEO Soundbar Plus / SB02M — Black
Nine physical drivers with virtual 7.1.4 AMBEO presentation
The Sennheiser AMBEO Soundbar Plus is an all-in-one home cinema bar with nine physical drivers, including two 4-inch woofers. Its AMBEO processing creates a virtual 7.1.4 presentation rather than supplying eleven separate channel speakers around the room. Built-in microphones support room calibration, helping the processing adapt to the listening space. Two HDMI inputs accept compatible video sources, and the HDMI eARC connection links the bar to a television. Optical and stereo RCA inputs, Ethernet, Wi-Fi and Bluetooth 5.0 broaden its connection options. The Smart Control app provides setup and sound adjustment. This listing includes the soundbar, not a separate AMBEO Sub or rear speakers. A compatible subwoofer can be added wirelessly or through the mono RCA subwoofer output. The USB-A socket supplies accessory power and supports servicing and updates; it is not a general music-playback input.
Sonos
Sonos Sub 4 Wireless Subwoofer – Black
Dual force-cancelling elliptical woofers
The Sonos Sub 4 adds low-frequency output to a compatible Sonos music or home-cinema system. Two inward-facing elliptical woofers operate in a force-cancelling arrangement designed to reduce cabinet vibration, while dual Class-D amplifiers drive the speakers inside a ported enclosure. Setup and system pairing take place through the Sonos app over a suitable network. This is not a universal RCA or LFE-input subwoofer for arbitrary amplifiers and receivers, and it needs mains power despite the wireless audio connection. The matte Black cabinet can stand upright or lie on its side, subject to the manufacturer's positioning guidance. Trueplay room tuning is available with supported Sonos equipment and setup; this description does not promise identical phone compatibility in every configuration. The listing contains one Sub 4, not a soundbar, speaker pair or complete surround package.
Eversolo
Eversolo DMP-A6 Gen 2 (Black)
Standard Gen 2 model, not Master Edition
The Eversolo DMP-A6 Gen 2 is a network music streamer and DAC for a separate hi-fi system. This black model is the standard second-generation version, rather than the Master Edition. Its six-inch touchscreen provides local control, while app control offers another way to browse a music library and select playback. Two ESS ES9038Q2M DAC chips handle the left and right channels, with balanced XLR and unbalanced RCA analogue outputs for connection to suitable amplification or active loudspeakers. Ethernet and dual-band Wi-Fi provide network access, and an internal SSD slot allows compatible storage to be added separately. The USB-C audio input supports high-resolution stereo sources, with optical and coaxial inputs available for other digital components. HDMI ARC brings compatible television audio into the system. A separate HDMI audio output serves a different purpose, including supported multichannel audio formats; it should not be confused with the ARC input. Passive loudspeakers still require an amplifier.
RCF
RCF EVOX J8 Black Portable Column PA System
Active two-way column system
The RCF EVOX J8 is an active two-way portable PA system built around a compact column and a bass-reflex subwoofer. Its satellite contains eight 2-inch full-range drivers, while a 12-inch woofer handles the low frequencies. The onboard Class-D amplifier is rated at 1,400 W peak, not continuous power; RCF separately specifies 700 W RMS. FiRPHASE processing supports the system’s acoustic performance, and the stated coverage is 120 degrees horizontally by 30 degrees vertically. XLR and jack inputs provide connection options, with an XLR output for onward routing. Unlike the JMIX8, this model does not include the eight-channel digital mixer. Its published maximum sound pressure level is 128 dB at one metre. This listing supplies one black complete column PA system, not a stereo pair. Other audio sources and accessories are not part of the photographed system unless explicitly stated.
AKG
AKG C414 XLS Multi-Pattern Condenser Microphone — Single
Nine selectable pickup patterns
The AKG C414 XLS is a large-diaphragm condenser microphone with nine selectable pickup patterns, allowing the same microphone to suit different vocal and instrument recording arrangements. Its controls include omnidirectional, cardioid and figure-eight positions with intermediate options. This is the XLS version with its reference-oriented voicing, not the presence-enhanced XLII model. It is supplied as one microphone rather than a matched stereo pair. Switchable attenuation provides 6, 12 or 18 dB of level reduction for loud sources. Three bass-cut options operate at 40, 80 and 160 Hz, letting the user reduce low-frequency content at the microphone. The manufacturer specifies 20 Hz to 20 kHz frequency range and 48 V phantom powering through the three-pin XLR connection. A peak-hold indicator helps identify signal overload, while a control-lock function can prevent accidental setting changes. The standard package includes a shock mount, windscreen, pop filter and carrying case. Those accessories do not turn it into a complete recording system: a compatible phantom-powered microphone input, suitable support and recording equipment are still required. Pattern selection and placement influence how much room sound is captured; none of the settings guarantees background-noise elimination.
FiiO
FiiO EA13 Stereo Valve Amplifier — Black
Class A push-pull design with two PCF80 and four EL34 valves
The FiiO EA13 is a black stereo valve amplifier built around Class A push-pull amplification. Its preamp section uses two PCF80 valves, with four EL34 valves in the power stage. Four selectable RCA line inputs allow connection of analogue source components; a turntable requiring phono equalisation needs a separate suitable phono stage. Dedicated speaker connections provide 4-ohm and 8-ohm options, while a 6.35 mm single-ended headphone socket supports personal listening. FiiO specifies at least 18 W per channel into either 4 or 8 ohms at THD+N below 1%; its higher 28 W per-channel rating uses the less stringent below-5% condition and should not be treated as the same measurement. Mechanical VU meters and rotary controls provide input selection and volume adjustment. The chassis measures approximately 430 by 339 by 145 mm and weighs about 17.7 kg. A 3.5 mm trigger input supports system integration. This model has analogue line inputs rather than a built-in Bluetooth receiver or digital DAC; speakers and source equipment are not included.
Solid State Logic
SSL 18 USB Audio Interface
Eight SSL-designed analogue preamps
The Solid State Logic SSL 18 is a rackmount USB audio interface designed for recording and monitoring with a compatible computer. Eight SSL-designed analogue preamps provide the core recording inputs, with selectable Legacy 4K analogue enhancement. Its advertised 26-input, 28-output configuration also includes digital connections and should not be described as twenty-six analogue microphone inputs. The digital section provides up to sixteen channels of ADAT input and output, plus stereo S/PDIF input and output. Available ADAT channel counts depend on the sample rate and connected equipment. Ten balanced analogue outputs support studio routing, and the configurable monitor control can be assigned to appropriate outputs through SSL 360 software. SSL specifies next-generation 32-bit/192 kHz converters. Headphone monitoring, MIDI connections and stereo loopback add recording and production options. A dedicated talkback path features SSL’s Listen Mic Compressor; this does not mean that every microphone input has that compressor. External digital preamps, microphones, speakers and a computer are separate purchases. This interface is not a standalone multitrack recorder.
Pioneer DJ
Pioneer DJ DJM-S5 Gloss Red Two-Channel Scratch Mixer
Two-channel scratch mixer in gloss red
The Pioneer DJ DJM-S5 is a gloss-red two-channel scratch mixer with a MAGVEL FADER PRO crossfader, four performance pads per deck and large effect paddles for controlling Serato DJ Pro. Connecting the mixer to a compatible computer unlocks Serato DJ Pro and Serato DVS; additional paid software expansion packs and control media are not promised. Scratch Cutter offers six cutting patterns, while Crossfader Hot Cue provides another performance option. The mixer has two line or phono RCA input sets, one microphone combination input and an auxiliary RCA input. Output connections comprise an XLR master, an RCA booth or second master and two headphone sockets. Two USB Type-C ports serve computer connection and power. The manufacturer dimensions are two hundred and forty-five by three hundred and sixty-three point five by one hundred and seven point nine millimetres, with a weight of three point four kilograms. Turntables, playback devices, a computer, control records and speakers are separate.