Two Tone / 70 products
PA & live sound
PA speakers, subwoofers, amplifiers, live mixers and wireless microphones.
In stock · Free UK delivery. Online ordering opens soon.
1–24 of 70 products
RCF
RCF SUB 8008-AS Dual 18-inch Active Subwoofer
Single cabinet with two 18-inch bass drivers
The RCF SUB 8008-AS is a single active subwoofer cabinet containing two 18-inch woofers with 4-inch voice coils. The 220–240V version is identified by manufacturer part 13000752 and EAN 8024530019945. RCF rates its amplifier at 4,400W peak and its maximum SPL at 137dB at one metre. The current manufacturer page does not state an RMS output figure, so no continuous-power claim is made. Frequency response is stated as 30Hz to 120Hz without an accompanying tolerance. Balanced or unbalanced wired audio uses XLR input and output connections. Eight crossover presets and four cardioid presets support system setup, alongside phase, Deep/Punch and output-delay controls. The black plywood cabinet has a protective polyurea coating, steel grille, two side handles and M20 mounting points for horizontal or vertical use. Power connections use powerCON TRUE1 TOP input and output. Manufacturer dimensions are 550 × 1,180 × 700mm, with an 80kg net weight, so this is substantial venue and touring equipment rather than a lightweight portable speaker. One dual-driver cabinet is supplied as the listing unit; additional speakers, poles, cover, wheels and a specific UK-plug cable are not promised as included.
RCF
RCF EVOX V15 Three-Way Column PA System — Black
Black 220–240V V15 three-way column PA system
The RCF EVOX V15 in Black is a three-way active column PA system pairing a 15-inch bass-reflex subwoofer with a column containing ten 4-inch neodymium midrange drivers and a neodymium compression driver. The compression driver has a 1.75-inch voice coil; that measurement is not the horn exit diameter. This listing is manufacturer part 13000949 for 220–240V mains operation. Its Class-D amplification totals 3,500W peak, split as 1,500W high-frequency and 2,000W low-frequency peak output; these figures are not RMS ratings. RCF specifies 133dB maximum SPL at one metre and coverage of 120 degrees horizontally by 40 degrees vertically. Onboard DSP provides level and Linear, Live, Club and Voice presets. Combo XLR/TRS inputs and an XLR output provide wired signal routing. The system combines a Baltic birch plywood bass cabinet and composite column, with convection cooling and powerCON TRUE1 TOP mains connections. Total system weight is 44.4kg. A padded transport bag for the column is included; subwoofer covers and transport board are optional accessories, not included. This is one mono column system, not a stereo pair, and no Bluetooth mixer or wireless audio function is claimed.
RCF
RCF EVOX12 Two-Way Column PA System — Black
Black220–240V EVOX12 two-way column system
The RCF EVOX 12 is a two-way active column PA system combining eight 4-inch neodymium full-range drivers in its satellite with a 15-inch bass-reflex woofer. This Black version is identified by manufacturer part 13000481 and EAN 8024530013196 for 220–240V operation. RCF specifies total amplifier output of 1,400W peak and 700W RMS, split between 400W peak/200W RMS for the upper section and 1,000W peak/500W RMS for the bass section. Maximum SPL is 130dB at one metre, with stated frequency response from 40Hz to 20kHz without a tolerance specified here. Coverage is 90 degrees horizontally by 30 degrees vertically. XLR and jack inputs, an XLR output, level and EQ controls, and an internal 180Hz crossover provide wired integration. The amplifier uses convection cooling. Baltic birch plywood cabinets, transport wheels and a telescopic handle support movement between venues. Current manufacturer dimensions are 2,200mm high by 410mm wide by 560mm deep, with a 36.4kg system weight. This listing is one column system, not a stereo pair; no Bluetooth mixer or protective cover is promised.
RCF
RCF EVOX J11 Three-Way Column PA System — Black
Black 220–240V J11 three-way column PA system
The RCF EVOX J11 in Black is a three-way active column PA system with a 12-inch bass-reflex subwoofer, twelve 3-inch neodymium full-range drivers and a compression driver with a 1.75-inch voice coil. Manufacturer part 13000932 identifies the 220–240V black version rather than a white or lower-voltage variant. Class-D amplification is rated at 3,500W peak in total, with 1,500W peak high-frequency and 2,000W peak low-frequency sections; no RMS amplifier-power figure is asserted. RCF specifies a maximum SPL of 132dB at one metre, a frequency range of 37Hz to 20kHz without a tolerance stated here, and coverage of 120 degrees horizontally by 40 degrees vertically. Built-in DSP offers level and application presets for live sound, club playback and voice. Combo XLR/TRS inputs and an XLR output provide wired audio routing. The composite cabinet and quick-fit column arrangement form a 29kg system measuring 2,080mm high by 350mm wide by 463mm deep in the standard configuration. A padded carrying bag for the column is included. Height-extension poles and subwoofer covers are optional; no digital mixer, Bluetooth streaming or stereo pair is bundled in this listing.
RCF
RCF SUB 18-AX 18-inch Active Subwoofer — Black
Black 220–240V single 18-inch active subwoofer
The RCF SUB 18-AX is a single powered 18-inch bass-reflex subwoofer for live sound and DJ systems. This black 220–240V version uses manufacturer part 13000836 and EAN 8024530021825. RCF specifies 2,200W peak and 1,100W RMS total amplifier power, with a maximum SPL of 135dB at one metre. Its stated frequency response is 35Hz to 120Hz; no frequency tolerance is supplied here. A 2.4-inch colour touch panel and rotary encoder provide local control, while Bluetooth supports parameter adjustment through the LiveRemote app rather than a claimed wireless audio input. Wired audio uses dual XLR/TRS combo inputs with links and dual XLR crossover outputs. Processing includes crossover presets, eight-band parametric EQ, routing, delay and cardioid configuration tools. The plywood cabinet has a polyurea finish, steel grille, side handles and an M20 threaded pole mount. RCF lists dimensions of 693 × 505 × 685mm and a net weight of 42.9kg. This listing covers one subwoofer, not a complete PA system or pair; no cover, pole, castor kit or UK-plug cable is promised without confirmed package information.
JBL
JBL PRX ONE Single Powered Column PA System
Single new column PA system; not pair or B-stock
The JBL PRX ONE is a mains-powered column PA system comprising one twelve-inch woofer cabinet and two connected linear-array sections with twelve two-point-five-inch tweeters in total. Its seven-channel digital mixer provides microphone and instrument connections, stereo auxiliary or Bluetooth audio and an XLR pass-through output. Built-in processing includes Lexicon effects and dbx functions for shaping connected sources. The official user guide rates the amplifier at two thousand watts peak and one thousand watts RMS; the peak figure must not be presented as continuous power. The system has a stated one-hundred-and-thirty-degree horizontal by thirty-degree vertical dispersion pattern. This listing is one new system, not a pair and not the lower-priced B-stock option shown on the donor page. The manufacturer lists a linear-array bag with the system; an optional subwoofer transporter is not included. AC mains power is required rather than a rechargeable speaker battery. Microphones and additional playback equipment are separate.
RCF
RCF EVOX J9 Black Three-Way Column PA System
True three-way architecture
The RCF EVOX J9 is an active three-way portable column loudspeaker, not a renamed J8 or a mixer-equipped JMIX model. Its acoustic design adds a dedicated compression driver to six 3-inch neodymium transducers and a 12-inch woofer. The compression driver works with a True Resistive Waveguide providing 120-degree horizontal and 40-degree vertical coverage. RCF rates the onboard Class-D amplifier at 2,100 W peak and the maximum SPL at 130 dB. Built-in DSP includes FiRPHASE and Bass Motion Control, with selectable voicing presets for different applications. The composite enclosure and quick-fit mounting arrangement support portable deployment. A padded carrying bag for the top speaker is included. The standard J9 does not include the JMIX-series eight-channel digital mixer. This listing supplies one black complete column PA system, not a stereo pair. Other audio sources and accessories are not part of the photographed system unless explicitly stated.
RCF
RCF SUB 15-AS 15-inch Active Subwoofer
Single 15-inch active subwoofer, 220–240V model
The RCF SUB 15-AS is a single mains-powered 15-inch subwoofer for live sound and mobile PA systems. This listing is the 220–240V version, manufacturer part 13000938, rather than the 100–120V variant. Its Class-D amplifier is rated at 2,200W peak; this is not a continuous or RMS output figure. RCF specifies a maximum sound pressure level of 133dB at one metre and a frequency response of 35Hz to 400Hz, without a response tolerance stated here. Bass Motion Control manages woofer excursion, while the rear panel provides level, polarity and low-pass frequency controls. Combo XLR/TRS inputs accept balanced or unbalanced signals, with stereo XLR link and crossover outputs for integrating full-range speakers. The Baltic birch plywood enclosure has a black polyurea finish, side handles and an M20 threaded pole socket. Convection cooling avoids a fan. The cabinet weighs 30kg and measures 590mm high by 420mm wide by 590mm deep. This is one powered subwoofer, not a complete speaker system; top speakers and a mounting pole are not included in this listing.
RCF
RCF EVOX JMIX8 Black Column PA System with Digital Mixer
Integrated eight-input digital mixer
The RCF EVOX JMIX8 combines an active two-way column PA with an integrated eight-input digital mixer. This mixer is the important distinction from the standard J8: it provides onboard mixing, effects and amplifier simulations rather than simply accepting an already mixed signal. Bluetooth audio and a Hi-Z instrument input extend the available source options, while the compatible mobile app provides remote control. The loudspeaker section pairs eight 2-inch full-range drivers with a 12-inch woofer. RCF specifies 1,400 W peak amplification and 700 W RMS, so the peak figure should not be presented as continuous output. FiRPHASE processing, 120-degree horizontal coverage and a stated 128 dB maximum SPL complete a self-contained system for performers who need mixing within the PA. This listing supplies one black complete column PA system, not a stereo pair. Other audio sources and accessories are not part of the photographed system unless explicitly stated.
RCF
RCF ART 935-A Powered PA Speaker — Single
15-inch powered PA speaker; one 220–240V unit
The RCF ART 935-A is a single powered PA speaker with a 15-inch woofer and a neodymium compression driver with a 3-inch voice coil. The 220–240V version is identified by RCF part number 13000682 and EAN 8024530019136. Its two-channel Class D amplifier provides 2100W peak output, split between 1400W for the woofer and 700W for the high-frequency section; these are peak figures, not a continuous or RMS rating. RCF specifies 133dB maximum SPL at one metre and 100° horizontal by 60° vertical coverage. FiRPHASE processing and Bass Motion Control manage phase behaviour and woofer excursion. Linear, Boost and Stage presets adapt the speaker to its application. A combination XLR/jack input accepts balanced or unbalanced signals, and an XLR output passes the signal onward. The polypropylene-composite cabinet has a 35mm pole socket, mounting points and carry handles, and weighs 24.6kg. This listing is for one mains-powered speaker, not a pair; mounting accessories are separate. Bluetooth streaming and battery operation are not features of this model.
Electro-Voice
Electro-Voice EVERSE 12 Black Battery-Powered PA Speaker
Single black12-inch battery-powered PA speaker
The Electro-Voice EVERSE 12 is a black battery-powered portable PA loudspeaker with a twelve-inch woofer and a titanium-diaphragm compression driver. Its built-in four-channel digital mixer includes effects, feedback suppression and ducking, with two XLR/TRS combination inputs, a stereo mini-jack connection and Bluetooth audio. The manufacturer lists a four-hundred-watt amplifier and a one-hundred-by-sixty-degree coverage pattern. A removable eighty-six-point-four-watt-hour lithium-ion battery supports use away from mains power. Electro-Voice states more than twelve hours of runtime at an average sound level of one hundred decibels with typical programme material, or more than six hours at maximum output before limit indication; these are different test conditions, not guaranteed runtimes for every event. The cabinet can be used upright or in its supported monitor positions. This listing is one speaker, not a pair, and no microphone, stand or optional weather cover is promised. Compatible sources and any additional event equipment are required.
QSC
QSC K12.2 12-inch Powered PA Loudspeaker
Single K12.2 powered12-inch PA loudspeaker
The QSC K12.2 is a single two-way powered loudspeaker with a 12-inch cone driver and a titanium-diaphragm compression driver. It uses a Class-D power module described by QSC as 2,000W; the official specification separately lists 1,800W low-frequency and 225W high-frequency peak output, not RMS ratings. QSC rates the maximum SPL at 132dB peak, measured on-axis at one metre with dynamic pink noise. Its frequency response is 50Hz to 20kHz at −6dB, while the wider frequency range is 45Hz to 20kHz at −10dB. The two figures are not interchangeable. Two locking XLR/TRS combo inputs support microphone/line and high-impedance/line sources, and a separate 3.5mm stereo input accepts a wired playback device. Two XLR thru outputs and a mixed XLR output support routing to other equipment. Onboard DSP offers presets and saved scenes with EQ, delay and input settings, controlled from the rear display. The ABS enclosure can serve as a main PA speaker or floor monitor, with straight or 7.5-degree down-tilted pole mounting. A variable-speed fan provides cooling. Net weight is 17.7kg. This is one speaker, not a stereo pair; mounting hardware, stand, tote and cover are optional rather than included.
RCF
RCF ART 932-A Powered PA Speaker — Single
12-inch powered PA speaker; one 220–240V unit
The RCF ART 932-A is a single powered PA speaker with a 12-inch woofer and a neodymium compression driver with a 3-inch voice coil. The 220–240V version is identified by RCF part number 13000680 and EAN 8024530019112. Its two-channel Class D amplifier provides 2100W peak output, split between 1400W for the woofer and 700W for the high-frequency section; these are peak figures, not a continuous or RMS rating. RCF specifies 132dB maximum SPL at one metre and 100° horizontal by 60° vertical coverage. FiRPHASE processing and Bass Motion Control manage phase behaviour and woofer excursion. Linear, Boost and Stage presets adapt the speaker to its application. A combination XLR/jack input accepts balanced or unbalanced signals, and an XLR output passes the signal onward. The polypropylene-composite cabinet has a 35mm pole socket, mounting points and carry handles, and weighs 19.2kg. This listing is for one mains-powered speaker, not a pair; mounting accessories are separate. Bluetooth streaming and battery operation are not features of this model.
Optimal Audio
Optimal Audio Zone 4P Four-Zone Powered Audio Controller
Four zones with integrated DSP and amplification
The Optimal Audio Zone 4P combines four-zone audio routing, digital signal processing and four integrated amplifier channels in a two-unit rack controller. Each amplifier channel is rated at one hundred watts into four or eight ohms. Bridged operation is specified at two hundred watts into a minimum eight-ohm load or for seventy-volt applications; this is not a native one-hundred-volt output on every channel. Two microphone inputs provide forty-eight-volt phantom power, alongside four stereo line inputs and two HDMI inputs for television or video sound. The browser-based WebApp supports configuration, loudspeaker presets, programmable settings and timed events. Four line outputs allow connections to additional amplification where required. This is the powered Zone 4P rather than the unpowered Zone 4. Compatible loudspeakers, audio sources, network access and any optional ZonePad controllers are separate. Speaker loading and bridged connections must follow the manufacturer installation instructions.
Pioneer DJ
Pioneer DJ XPRS122
12-inch active full-range loudspeaker
The Pioneer DJ XPRS122 is a twelve-inch full-range active loudspeaker in the XPRS2 series, combining amplification and digital signal processing within a protective plywood cabinet. It can form part of a mobile DJ system, live-performance PA or fixed sound setup. A twelve-inch woofer works alongside a compression driver with a one-inch exit, while the published frequency response spans 48 Hz to 20 kHz. Pioneer DJ specifies a maximum SPL of 131 dB. Four DSP presets cover Live, Music, Speech and Studio Monitoring applications, and sixteen custom user modes allow personalised settings to be saved with names. A carrying handle and rubber feet support transport and positioning. The speaker requires suitable mains power and audio connections; it is not a battery-powered portable system. Select additional speakers or subwoofers according to the requirements of the venue.
RCF
RCF EVOX J8 Black Portable Column PA System
Active two-way column system
The RCF EVOX J8 is an active two-way portable PA system built around a compact column and a bass-reflex subwoofer. Its satellite contains eight 2-inch full-range drivers, while a 12-inch woofer handles the low frequencies. The onboard Class-D amplifier is rated at 1,400 W peak, not continuous power; RCF separately specifies 700 W RMS. FiRPHASE processing supports the system’s acoustic performance, and the stated coverage is 120 degrees horizontally by 30 degrees vertically. XLR and jack inputs provide connection options, with an XLR output for onward routing. Unlike the JMIX8, this model does not include the eight-channel digital mixer. Its published maximum sound pressure level is 128 dB at one metre. This listing supplies one black complete column PA system, not a stereo pair. Other audio sources and accessories are not part of the photographed system unless explicitly stated.
Studiomaster
Studiomaster digiLiVE16 Digital Mixing Console
Sixteen inputs: twelve mic channels and two stereo inputs
The Studiomaster digiLiVE16 is a sixteen-input digital mixing console with twelve microphone input channels and two stereo input channels. Its seven-inch touchscreen shows channel settings, routing and processing, while nine motorised one-hundred-millimetre faders comprise eight channel faders and a main-mix fader. Twelve microphone sockets are provided as eight XLR and four XLR/jack combination inputs. Eight balanced XLR outputs comprise the left and right master outputs and six assignable smart outputs, with sixteen internal buses available for routing. Channel processing includes four-band parametric equalisation, gating and compression, with assignable effects and graphic equalisation. The built-in media player and recorder support USB playback and recording; this is not a promise of a sixteen-track computer audio interface. Remote iPad control requires a suitable Wi-Fi connection through an external module, whose inclusion has not been established. The manufacturer specifies a forty-eight-kilohertz operating sample frequency and a twenty-four-volt DC external power-supply output. This is the console with a touchscreen and physical faders, not the separate rack-style digiLiVE16RS. Microphones, a tablet, speakers and any unconfirmed wireless accessory are not included in this selection.
Soundcraft
Soundcraft Ui24R 24-Channel Digital Mixer and Multitrack Recorder
24-channel mixing with 20 Studer-designed mic preamps
The Soundcraft Ui24R is a rack-mountable digital mixer and multitrack recording system for live sound and studio sessions. Its 24-channel mixing layout includes 20 Studer-designed microphone preamps, with ten combination XLR/TRS sockets and ten XLR sockets, plus two line-level inputs and two channels of USB playback. It is not a mixer with 24 microphone preamps. Built-in dual-band Wi-Fi and Ethernet let compatible browsers control the mixer from up to ten devices; this is remote control rather than wireless audio streaming. Lexicon reverb, chorus and delay, dbx compression and DigiTech guitar amp modelling provide processing within the mixer. Input-channel processing includes parametric EQ, a high-pass filter, compression, de-essing and a noise gate. Automatic feedback suppression is available on monitor outputs. Soundcraft describes simultaneous multitrack recording of the 22 physical inputs and stereo mix to USB storage and a connected computer. The USB audio connection also integrates with recording software. This listing is for one Ui24R mixer, not a package of microphones, speakers, tablets or USB storage devices. Recording-file bit depth and computer-interface channel counts are not specified here because those details require separate verified documentation.
QSC
QSC K10.2 10-inch Active PA Loudspeaker
Single K10.2 powered loudspeaker with 10-inch woofer
The QSC K10.2 is a single two-way active PA loudspeaker built around a 10-inch cone woofer and a compression driver with a 1.4-inch titanium diaphragm. QSC specifies a Class-D amplifier with 1,800W peak output for low frequencies and 225W peak for high frequencies; these figures are peak ratings rather than continuous amplifier output. Its maximum rated sound pressure level is 130dB peak, measured on-axis at one metre with dynamic pink noise. Frequency response is 56Hz to 20kHz at −6dB, while the wider frequency range is 50Hz to 20kHz at −10dB. Nominal axisymmetric coverage is 90 degrees. Two locking XLR/TRS combination inputs provide selectable MIC/LINE and HI-Z/LINE operation, and a separate 3.5mm stereo input has its own level control. Two XLR throughput outputs and one mixed XLR output support connection to additional equipment. Factory presets, user EQ, delay and saved scenes are accessed through the LCD and controls. The impact-resistant ABS cabinet supports main-PA or floor-monitor use, with dual pole cups for straight or 7.5-degree downward tilt and integrated M10 mounting fittings. QSC specifies a universal 100–240V AC, 50–60Hz supply with a locking IEC power connection and variable-speed fan cooling. Cabinet dimensions are 519 × 320 × 300mm and net weight is 14.5kg. This is one speaker, not a pair; covers, yokes and other mounting accessories are optional rather than promised included.
Yamaha
Yamaha MG20XU 20-Channel USB Mixer with Effects
20-channel console with up to 16 D-PRE mic inputs
The Yamaha MG20XU is a 20-channel analogue mixing console with up to 16 D-PRE microphone inputs and a stereo USB audio interface. Its input layout has twelve mono MIC/LINE strips and four stereo-capable MIC/LINE strips, so the 20-channel headline is not a count of 20 microphone preamps. One-knob compression on selected mono channels helps manage signal dynamics, and the integrated SPX processor offers 24 effects programs. Four group buses and four auxiliary buses, including the effects send, support routing and monitoring alongside the main stereo bus. The USB connection carries two inputs and two outputs at up to 24-bit/192kHz for stereo recording and playback, rather than recording every console channel separately. Balanced XLR main outputs connect the console to a PA system, with group, monitor and headphone connections available for other signal paths. Yamaha specifies +48V phantom power, an internal universal power supply and a metal chassis. The console measures 444 × 130 × 500mm in width-by-height-by-depth order and weighs 7.1kg. Yamaha lists the rack-mount kit as included; the FC5 footswitch is optional. This listing is for one MG20XU mixer, not a microphone, speaker or computer package.
RCF
RCF SUB 702-AS MK3 12-inch Active Subwoofer
Single 12-inch active subwoofer, 220–240V model
The RCF SUB 702-AS MK3 is a single mains-powered 12-inch bass-reflex subwoofer intended to support compact PA systems. The exact variant is manufacturer part 13000818 for 220–240V mains operation; it is not the older SUB 702-AS II or the 100–120V version. RCF gives the Class-D amplifier ratings as 1,400W peak and 700W RMS, with a maximum sound pressure level of 129dB at one metre. Its stated frequency response is 40Hz to 120Hz, without a tolerance specified here. Bass Motion Control manages woofer excursion and the built-in stereo crossover supports integration with full-range loudspeakers. Rear-panel controls cover level, equalisation, polarity and crossover, with XLR inputs and outputs for balanced or unbalanced signals. The amplifier uses convection cooling rather than a fan. The black Baltic birch plywood cabinet has side handles and an M20 threaded pole socket. Current manufacturer specifications give a weight of 21.5kg and dimensions of 523mm high by 360mm wide by 515mm deep. This listing supplies one powered subwoofer; satellites, mounting pole and protective cover are not part of the described package.
QSC
QSC K8.2 8-inch Active PA Loudspeaker
Single K8.2 powered loudspeaker with 8-inch woofer
The QSC K8.2 is a single two-way active PA loudspeaker built around a 8-inch cone woofer and a compression driver with a 1.4-inch titanium diaphragm. QSC specifies a Class-D amplifier with 1,800W peak output for low frequencies and 225W peak for high frequencies; these figures are peak ratings rather than continuous amplifier output. Its maximum rated sound pressure level is 128dB peak, measured on-axis at one metre with dynamic pink noise. Frequency response is 59Hz to 20kHz at −6dB, while the wider frequency range is 55Hz to 20kHz at −10dB. Nominal axisymmetric coverage is 105 degrees. Two locking XLR/TRS combination inputs provide selectable MIC/LINE and HI-Z/LINE operation, and a separate 3.5mm stereo input has its own level control. Two XLR throughput outputs and one mixed XLR output support connection to additional equipment. Factory presets, user EQ, delay and saved scenes are accessed through the LCD and controls. The impact-resistant ABS cabinet supports main-PA or floor-monitor use, with dual pole cups for straight or 7.5-degree downward tilt and integrated M10 mounting fittings. QSC specifies a universal 100–240V AC, 50–60Hz supply with a locking IEC power connection and variable-speed fan cooling. Cabinet dimensions are 449 × 280 × 269mm and net weight is 12.2kg. This is one speaker, not a pair; covers, yokes and other mounting accessories are optional rather than promised included.
Electro-Voice
Electro-Voice EVERSE 8
Rechargeable removable battery: 12+ hours at 95 dB average; 6+ hours at maximum output
The Electro-Voice EVERSE 8 is an eight-inch portable PA speaker with a rechargeable, removable battery and an integrated four-channel mixer. Designed for mobile performances and spoken-word events, it combines microphone and line inputs with Bluetooth playback and app control. Dynacord-powered processing provides effects and sound-shaping tools, while wireless stereo linking supports a compatible two-speaker setup. Battery duration depends on volume and programme material: Electro-Voice quotes more than twelve hours at an average 95 dB SPL with typical programme, or more than six hours at maximum output before limit indication. IP43 splash protection applies only with the supplied weatherised input cover, battery operation and Bluetooth streaming. It is not waterproof, and wired connections must not be treated as weather-protected. The speaker provides 100-degree by 100-degree coverage and a maximum SPL of 121 dB.
Yamaha
Yamaha MG20 20-Channel Analogue Mixer
20-channel analogue console with 16 microphone inputs
The Yamaha MG20 is a twenty-channel analogue mixing console for live sound, rehearsal rooms and larger instrument setups. This is the standard MG20, not the MG20XU: it has no USB audio interface or onboard SPX digital effects. Twelve mono microphone and line channels are joined by four mono or stereo input sections, providing sixteen microphone inputs and twenty line inputs in total. Yamaha D-PRE microphone preamps, one-knob compression on supported channels, input pads and high-pass filtering provide practical control before signals reach the main mix. Four group buses and four auxiliary sends allow separate signal routing for monitors and external processing, while balanced XLR stereo outputs connect to suitable sound systems. The mixer provides forty-eight-volt phantom power for compatible microphones and uses an internal universal mains supply. The manufacturer lists a rack-mount kit and mains lead among the supplied accessories. Microphones, speakers, signal cables, external effects units and recording interfaces are separate. Its twenty-channel designation counts audio channels rather than twenty independent microphone preamps.