Two Tone / 290 products
The equipment
DJ equipment, studio essentials, live sound, home audio and headphones.
In stock · Free UK delivery. Online ordering opens soon.
169–192 of 290 products
Shure
Shure SM7dB Dynamic Vocal Microphone — Black
Cardioid dynamic microphone with analogue XLR output
The Shure SM7dB is a cardioid dynamic microphone for spoken-word and vocal recording, with an analogue XLR output for connection to a microphone input. Its distinguishing feature is a built-in preamp, rather than a USB interface. Rear switches select an additional 18 dB or 28 dB of gain, helping match the microphone’s output to the recording chain without adding a separate inline booster. The preamp needs 48 V phantom power from a compatible interface or mixer. A bypass switch removes that active gain stage, returning the microphone to passive operation. This distinction matters when choosing an input: the microphone remains dynamic even though its optional preamp uses phantom power. Bass roll-off and presence controls allow the response to be adjusted at the microphone. A yoke mount provides angle adjustment, while the foam windscreen and internal shock isolation help manage breath and handling noise. The cardioid pattern favours sound arriving from the front; it does not eliminate room noise or replace acoustic treatment. This is the SM7dB, not the original SM7B or a USB recording microphone. A suitable recording interface, support stand and recording system are separate requirements.
Clever Acoustics
Clever Acoustics MA 4120 MKII Four-Zone Mixer Amplifier
Four independent 120W RMS zones; 480W RMS total
The Clever Acoustics MA 4120 MKII is a rack-mounted installation mixer amplifier with four independently controlled output zones. Each zone has a one-hundred-and-twenty-watt RMS amplifier, giving four hundred and eighty watts RMS in total. Speaker terminals provide four- or eight-ohm low-impedance connections and twenty-five-, seventy- or one-hundred-volt line options. Input channels one to four use XLR and jack combination sockets with microphone, line or forty-eight-volt phantom-power selection; channel five accepts a stereo RCA line source. Inputs can be routed to the required zones, with physical gain, bass, treble and output-level controls. A telephone paging input, priority functions, zone line outputs and local monitoring support commercial installations. This is the MA 4120 MKII model identified by manufacturer code CRAM33, not a network-controlled DSP system. Loudspeakers, microphones and installation cabling are separate. Use only the appropriate output terminals for the connected load and follow the manual for mains selection and installation.
Reloop
Reloop RP-7000 MK2 Black Direct-Drive Turntable
Upper-torque direct drive
The Reloop RP-7000 MK2 is an upper-torque direct-drive turntable with an adjustable tonearm base and vertical tracking angle adjustment. Three playback speeds cover 33⅓, 45 and 78 rpm, while the pitch control provides selectable adjustment ranges for DJ use. Its motor and chassis are designed for a stable, hands-on vinyl setup, and the audio output requires suitable downstream equipment rather than built-in loudspeakers. The exact donor offer selected here is the Single variant, with the black-finish barcode; neither the pair offer nor silver gallery views are used for this product. This listing supplies one turntable. A cartridge, stylus, mixer and speakers are not assumed to be included. Playing 78 rpm records also requires an appropriate stylus and cartridge configuration rather than merely selecting the speed.
Bose
Bose Smart Soundbar — Black, Single
Compact 2024 Bose Smart Soundbar model
The Bose Smart Soundbar is the compact 2024 model finished in black, rather than the larger Smart Ultra Soundbar or the earlier Smart Soundbar 600. It supports Dolby Atmos with suitable content and television equipment, while Bose TrueSpace processes other material to create a broader spatial presentation. AI Dialogue Mode adjusts the balance of spoken voices and other programme sound to help dialogue remain audible. The soundbar connects to a compatible television through HDMI eARC or an optical audio connection; optical is an alternative for supported audio rather than a route to every Dolby Atmos format. Wi-Fi and Bluetooth support music streaming, with Apple AirPlay 2, Chromecast built-in and Spotify Connect listed by Bose. The Bose app manages setup and settings. Amazon Alexa is integrated where supported, while Google Assistant operation requires a separate compatible Google Home device. Optional Bose bass modules, surround speakers and Ultra Open Earbuds can expand the experience, but this listing does not include those accessories. It contains one compact soundbar rather than a complete separate-speaker surround package.
JBL
JBL Bar 500 MK2 — Black
5.1-channel soundbar and included wireless 10-inch subwoofer
The JBL Bar 500 MK2 combines a slim soundbar with a wireless 10-inch subwoofer in a 5.1-channel home cinema system. MultiBeam 3.0 uses reflected sound to broaden the listening area, while Dolby Atmos and DTS Virtual:X processing create a spatial presentation without supplied rear speakers. These effects should not be confused with discrete overhead speakers. An HDMI input accepts a compatible video source, and the HDMI eARC output connects the system to a television. Optical input, Bluetooth 5.3 and dual-band Wi-Fi provide further connection options. The JBL One app supports setup and sound adjustment, including calibration for the room. PureVoice 2.0 adjusts dialogue reproduction. Both the bar and subwoofer require mains power; wireless refers to their audio connection. The UK USB socket is for servicing, not music playback.
Sonos
Sonos Era 300 Wireless Speaker – Black (Single)
Single active wireless speaker; no external amplifier required
The Sonos Era 300 is a mains-powered wireless loudspeaker supplied as a single unit, with amplification built in rather than requiring a separate hi-fi amplifier. Its six drivers include side-facing woofers and an upward-facing tweeter, giving supported Dolby Atmos music a sense of height as well as width. Wi-Fi streaming, Apple AirPlay 2 and Bluetooth provide several ways to listen, while Trueplay adjusts the equalisation to suit the room. Initial setup requires Wi-Fi, an internet connection, a compatible device and the Sonos app, even if you subsequently use Bluetooth. Analogue sources need the separately sold Sonos Line-In Adapter and an auxiliary cable; a turntable also needs suitable phono preamplification. This connection is not intended for television use. Home-cinema surround operation requires two Era 300 speakers and a compatible Sonos soundbar, not this single speaker alone.
Wharfedale
Wharfedale DIAMOND 12.3i Floorstanding Speakers – Deep Black (Pair)
Passive 2.5-way floorstanding design
The Wharfedale DIAMOND 12.3i is a passive floorstanding loudspeaker supplied in this offer as a stereo pair. The All-Black finish has a deep, rich semi-matte appearance. This is the updated 12.3i, not the earlier DIAMOND 12.3. Each cabinet uses a 2.5-way bass-reflex design, with 130 mm bass and midrange drivers and a 25 mm textile-dome tweeter. Revised port tuning and internal damping refine bass control while retaining the series’ established design approach. An external amplifier, source and speaker cables are required; these are not powered or wireless speakers. Wharfedale specifies 89 dB sensitivity, 8-ohm-compatible nominal impedance and a 5-ohm minimum. Weight is 19.5 kg per speaker. Separate source components and suitable speaker cable complete a conventional stereo installation.
Cambridge Audio
Cambridge Audio AXR100D Stereo Receiver – Lunar Grey
100 W output into 8 ohms
The Cambridge Audio AXR100D is a stereo receiver that brings together amplification and DAB/DAB+ plus FM broadcast radio. Its amplifier is specified at 100 W into 8 ohms, and the moving-magnet phono stage accepts a compatible turntable without a separate phono preamplifier. Bluetooth 5.0 provides wireless audio from a suitable source device, while optical and coaxial digital inputs support connected equipment. A subwoofer output follows the main volume setting, and speaker outputs allow the supported A/B arrangements. Radio reception needs a suitable signal and antenna; broadcast tuning does not require an internet music subscription. This receiver is not a Wi-Fi network streamer and should not be confused with the AXR100 model without the DAB tuner. Lunar Grey describes the cabinet finish. Speakers, source components and streaming-service access are not included in this one-receiver listing.
KEF
KEF Q1 Meta Bookshelf Speakers – Satin Black Pair
Pair of passive bookshelf speakers
The KEF Q1 Meta is a compact passive two-way bookshelf speaker supplied here as a pair in Satin Black. Each speaker uses a 12th-generation Uni-Q array with Metamaterial Absorption Technology, placing a 25 mm vented aluminium-dome tweeter concentrically within a 130 mm aluminium-cone mid/bass driver. The bass-reflex design has a manufacturer-rated frequency response of 51 Hz to 20 kHz within ±3 dB. KEF specifies 86 dB sensitivity, a nominal 4-ohm impedance and a minimum of 3.2 ohms, with amplifier requirements of 10 to 150 W. These values concern each speaker, not combined pair output. There is no built-in amplification or wireless streaming, so a suitable external amplifier and speaker cables are needed. Each cabinet weighs 6.1 kg and measures 302 by 180 by 277 mm including the terminal. This listing contains two speakers, not stands or a complete cinema system.
Sennheiser
Sennheiser IE 600 Wired In-Ear Earphones
7 mm TrueResponse dynamic drivers
The Sennheiser IE 600 is a wired in-ear earphone built around a single 7 mm TrueResponse dynamic transducer in each earpiece. Its compact ZR01 amorphous-metal housings incorporate dual-chamber absorbers to manage acoustic resonances. Detachable cables connect through the recessed Fidelity+ MMCX sockets, with 3.5 mm single-ended and 4.4 mm balanced cable options supplied. Adjustable ear hooks help position the earpieces, while suitable ear tips provide passive isolation rather than electronic active noise cancellation. The 18-ohm design needs a compatible headphone output; a balanced cable requires a matching balanced socket and is not a promise of better sound from every source. This listing contains the IE 600 earphones, not a player or amplifier. There is no Bluetooth connection, rechargeable battery or wireless charging feature.
Cambridge Audio
Cambridge Audio CXC Lunar Grey CD Transport
Compact-disc transport
The Cambridge Audio CXC is a Lunar Grey compact-disc transport intended for use with an external DAC or a DAC-equipped amplifier. It reads supported audio CDs and sends the digital audio signal through optical or coaxial S/PDIF outputs. It does not contain the analogue output stage of a conventional CD player, so it cannot be connected directly to a line-level analogue input without additional conversion equipment. This distinction matters when building a complete listening system: amplification and speakers are also required. The exact donor barcode matches the supplied Google report, but no unverified V2 generation label has been added. This listing supplies one CXC transport rather than a transport-and-amplifier package. Room photographs and accessory presentations have been omitted from the prepared exact-model gallery.
DALI
DALI IO-8 Iron Black Wireless Headphones
Closed-back over-ear design with ANC
The DALI IO-8 combines a closed-back over-ear design with wireless listening and active noise cancellation. This listing is the Iron Black finish, identified by the donor as Black. Custom 50 mm drivers use paper-fibre cones, while selectable Hi-Fi and Bass sound modes provide two listening approaches. Bluetooth 5.2 supports compatible wireless sources, and the manufacturer also lists 3.5 mm analogue and USB-C audio inputs. The stated battery playback time is up to 35 hours, rather than a guaranteed duration for every volume, connection or listening condition. Passive-mode impedance is specified as 25 ohms; that figure should not be treated as a Bluetooth performance rating. Compatible sources, recordings and connection settings determine available audio formats. The prepared gallery contains only clean views of the exact dark finish, with the review badge and photographs of people removed.
RCF
RCF ART 712-A MK5 12-inch Active PA Loudspeaker
Single black 220–240V ART 712-A MK5 speaker
The RCF ART 712-A MK5 is a single two-way active PA loudspeaker combining a 12-inch woofer with a 1-inch-exit compression driver using a 1.75-inch voice coil. This black 220–240V version is identified by manufacturer part 13000823 and EAN 8024530021450. RCF specifies 1,400W peak total amplifier output, split into 1,000W peak for the low-frequency section and 400W peak for the high-frequency section. The current official page and portable catalogue give peak ratings rather than an RMS output, so no continuous-power figure is claimed. Maximum SPL is 129dB at one metre. The stated frequency response is 50Hz to 20kHz, without an accompanying tolerance, and nominal coverage is 90 degrees horizontally by 60 degrees vertically. FiRPHASE processing and selectable XBOOST bass enhancement support full-range reproduction. Wired XLR and jack inputs, an XLR output, volume, Boost and MIC/Line controls provide integration with a mixer or microphone source. The polypropylene-composite cabinet has a steel grille, top and side handles, a 35mm pole insert and two M10 mounting points. It can be used upright or as a floor monitor. Manufacturer dimensions are 637 × 387 × 363mm, with a 17.8kg net weight. This is one loudspeaker, not a pair or a bundle with stands, cables or covers; mounting accessories are not promised as included.
RCF
RCF ART 910-A 10-inch Active PA Loudspeaker
Single black 220–240V ART 910-A loudspeaker
The RCF ART 910-A is a single two-way active PA loudspeaker with a 10-inch woofer and a compression driver featuring a 1-inch exit and 1.75-inch voice coil. This black 220–240V version is identified by manufacturer part 13000654 and EAN 8024530019303. Its Class-D amplifier provides 2,100W total peak power, comprising 1,400W peak for low frequencies and 700W peak for high frequencies. RCF specifies a maximum sound pressure level of 130dB at one metre, a frequency response of 50Hz to 20kHz and 100° × 60° horizontal-by-vertical coverage. FiRPHASE and Bass Motion Control woofer-excursion processing supports the loudspeaker’s full-range output. Wired XLR and jack inputs, an XLR output and Linear, Boost, Stage and Volume controls allow connection and adjustment for the application. The polypropylene-composite enclosure has a steel grille, a top handle, a 35mm pole insert and M10 mounting provisions. Cabinet dimensions are 572 × 330 × 310mm and net weight is 15.8kg. This listing is for one loudspeaker, not a pair. Stands, covers, external mounting hardware and other accessories are not promised as included.
Yamaha
Yamaha MG16XU 16-Channel USB Mixer with Effects
16-channel console with up to10 D-PRE mic inputs
The Yamaha MG16XU is a 16-channel analogue mixing console with 10 microphone inputs, D-PRE preamps and an integrated stereo USB audio interface. Its input layout combines 8 mono MIC/LINE strips, two stereo-capable MIC/LINE strips and two stereo line-input strips. This is a 16-channel mixer, not a 16-microphone preamp bank. One-knob compression on selected mono channels helps control signal dynamics, while the SPX effects processor provides 24 programs for adding effects to the mix. The console has 4 group buses, one stereo bus and 4 auxiliary buses including the effects send. USB audio supports two input and two output channels at up to 24-bit/192kHz, making it suitable for stereo recording and playback rather than separate multitrack capture of every mixer channel. Balanced XLR stereo outputs provide the main connection to a PA system, with group, monitor and headphone outputs available for routing and monitoring. Yamaha specifies +48V phantom power and an internal universal power supply. The metal chassis measures 444 × 130 × 500mm in width-by-height-by-depth order and weighs 6.8kg. Yamaha lists the rack-mount kit as included. This listing is for one MG16XU console; microphones, stands, speakers and computer connection accessories are not promised as included.
RCF
RCF ART 710-A MK5 10-inch Active PA Loudspeaker
Single black 220–240V ART 710-A MK5 loudspeaker
The RCF ART 710-A MK5 is a single two-way active PA loudspeaker with a 10-inch woofer and a compression driver featuring a 1-inch exit and 1.75-inch voice coil. This black 220–240V version is identified by manufacturer part 13000822 and EAN 8024530021443. Its Class-D amplifier provides 1,400W total peak power, comprising 1,000W peak for low frequencies and 400W peak for high frequencies. RCF specifies a maximum sound pressure level of 129dB at one metre, a frequency response of 50Hz to 20kHz and 90° × 70° horizontal-by-vertical coverage. FiRPHASE processing and selectable XBOOST bass enhancement supports the loudspeaker’s full-range output. Wired XLR and jack inputs, an XLR output and Volume, Boost and MIC/Line controls allow connection and adjustment for the application. The polypropylene-composite enclosure has a steel grille, a top handle, a 35mm pole insert and M10 mounting provisions. Cabinet dimensions are 548 × 340 × 305mm and net weight is 14.2kg. This listing is for one loudspeaker, not a pair. Stands, covers, external mounting hardware and other accessories are not promised as included.
Electro-Voice
Electro-Voice ZLX-12P-G2
12-inch two-way powered loudspeaker with 90° x 60° coverage
The Electro-Voice ZLX-12P-G2 is a powered 12-inch two-way loudspeaker for live performances, DJ playback and speech. Its built-in digital mixer brings audio connections and sound shaping together within the cabinet, making it useful when a compact setup is preferable to a separate mixer. Dynacord-powered processing includes effects, equalisation, feedback suppression and ducking. Two XLR/TRS combination inputs and a dedicated instrument input provide options for connecting microphones and compatible sources. Bluetooth stereo streaming supports music playback, while QuickSmart Mobile offers remote control of speaker settings. The cabinet can be positioned for main PA or stage-monitor use. It requires mains power; wireless audio streaming does not make it a battery-powered speaker. Electro-Voice specifies a maximum sound pressure level of 127 dB and 90-degree by 60-degree coverage.
Sony
Sony ULT TOWER 9AC Mains-Powered Party Speaker, Black
Mains-powered ULT TOWER 9AC; no battery runtime claimed
The Sony ULT TOWER 9AC is a mains-powered three-way bass-reflex party speaker, supplied here in black. Its driver arrangement combines one approximately 320 by 320mm woofer with two 120mm midrange units, two 50mm front tweeters and two 40mm rear tweeters. This is the AC version, so it should not be confused with a battery-equipped ULT TOWER model or advertised with battery runtime. Connections include a USB-A port, a 3.5mm audio input and optical input, alongside separate 6.3mm MIC1 and MIC2/GUITAR sockets for microphones or an instrument. The optical input accepts PCM signals at 32, 44.1, 48 and 96kHz. Sony specifies a cabinet size of 410 by 910 by 456mm including projecting parts and controls, and an approximate weight of 28.5kg. Its quoted 148W consumption describes electrical input, not loudspeaker audio output. Plan for a suitable mains supply and the cabinet’s size when placing it in your room or event space.
Allen & Heath
Allen & Heath ZED-12FX 12-Channel USB Mixer with Effects
6 mic/line channels and 3 stereo channels
The Allen & Heath ZED-12FX is a 12-channel analogue mixer with six microphone/line channels, three stereo channels and built-in effects. The six mic/line channels use DuoPre preamps and three-band equalisation with a sweepable mid-frequency control. Its 12-channel description is a total mixing-channel count, not twelve microphone preamps. Three auxiliary buses and a dedicated internal effects bus support monitoring and processing, while the onboard processor supplies 16 effects. Balanced XLR main outputs with insert points provide connections for the main sound system and external processing. The USB audio interface carries a stereo signal in each direction, giving two inputs and two outputs rather than separate multitrack capture of all mixer inputs. The official user guide specifies a 16-bit USB codec with 32, 44.1 or 48kHz sample rates; this should not be confused with the separate 24-bit/48kHz conversion used by the internal effects processor. The mixer is suitable for combining microphones, instruments and stereo playback sources in rehearsal, live-sound or recording setups. This listing covers one ZED-12FX mixer. Microphones, speakers and recording computers are not included as a bundle, and no rack-mount accessory is promised with this offer.
Alto Professional
Alto Professional TS12S 12-Inch Powered PA Subwoofer
12-inch bass driver
The Alto Professional TS12S is a powered PA subwoofer built around a 12-inch driver with a 3-inch high-temperature voice coil. Its Class D amplifier is specified at 2,500 W peak; that figure is not a continuous or RMS rating. Off, Live and DJ EQ settings provide different tuning choices, while the phase selector offers 0, 90, 180 and 270-degree settings to help integrate the bass with the main speakers. Two XLR/quarter-inch combo inputs accept wired audio signals and two XLR thru outputs provide onward connections. The internally braced, front-ported MDF cabinet includes a pole socket, but a pole and full-range speaker are not part of this single-subwoofer listing. It needs mains power and suitable full-range speakers for a complete PA; it is not a wireless or battery-powered loudspeaker.
beyerdynamic
beyerdynamic DT 1990 PRO MKII Studio Headphones
Open-back wired studio design
The beyerdynamic DT 1990 PRO MKII is a wired, open-back over-ear studio headphone designed for mixing, mastering and editing. Its TESLA.45 dynamic driver is specified at 30 ohms: TESLA.45 is the technology name, not a 45-ohm impedance rating. The MKII must also be distinguished from the older 250-ohm generation. The open construction allows sound to escape and room noise to enter, so it is more suitable for a quiet studio than isolated live monitoring. A detachable single-sided mini-XLR cable connection supports replacement and transport, and the manufacturer lists 3 m straight and 5 m coiled cables. The padded headband incorporates a fontanelle recess intended to reduce pressure at the top of the head. This listing contains the MKII headphones rather than a microphone, audio interface or recording package. Bluetooth and battery-powered operation are not part of the design.
beyerdynamic
beyerdynamic DT 1770 PRO MKII Studio Headphones
Closed-back wired studio design
The beyerdynamic DT 1770 PRO MKII is a wired, closed-back over-ear studio headphone designed for recording, monitoring and editing. Its TESLA.45 dynamic driver is specified at 30 ohms: TESLA.45 is the technology name, not a 45-ohm impedance rating. The MKII must also be distinguished from the older 250-ohm generation. The closed construction provides passive isolation from the room; it is not electronic active noise cancellation. A detachable single-sided mini-XLR cable connection supports replacement and transport, and the manufacturer lists 3 m straight and 5 m coiled cables. The padded headband incorporates a fontanelle recess intended to reduce pressure at the top of the head. This listing contains the MKII headphones rather than a microphone, audio interface or recording package. Bluetooth and battery-powered operation are not part of the design.
Mackie
Mackie Thump212XT 12-inch Bluetooth Powered PA Speaker
Single12-inch powered PA speaker with Bluetooth
The Mackie Thump212XT is a single twelve-inch powered PA loudspeaker with a one-inch polymer compression driver and Class-D amplification rated at one thousand four hundred watts peak. The XT model adds Bluetooth music streaming, compatible speaker linking and remote control through the Thump Connect 2 application. Four voicing modes cover Music, Live, Club and Monitor use, with an Indoor or Outdoor setting for different environments. Music Ducking can reduce channel two when a microphone signal reaches channel one, and the Feedback Eliminator helps control unwanted acoustic feedback. The input section provides microphone or line connection on channel one, line-level and stereo auxiliary connections on channel two, and an XLR thru output carrying the mixed signal. The manufacturer manual specifies a frequency range of forty-seven hertz to twenty-three kilohertz at minus ten decibels and fifty-four hertz to twenty kilohertz at minus three decibels. Bluetooth links do not mean that a second loudspeaker is included. This selection is one mains-powered speaker, not a pair, battery system or installation kit; stands, rigging hardware, microphones and audio cables are separate.
Mackie
Mackie Thump215 15-inch Powered PA Speaker
Single15-inch powered PA speaker
The Mackie Thump215 is a single powered PA loudspeaker with a fifteen-inch woofer and a one-inch polymer compression driver. Its Class-D amplification is rated at one thousand four hundred watts peak, not continuous RMS power, with a maximum peak sound-pressure level of one hundred and twenty-nine decibels. The built-in two-channel mixer accepts a microphone or line signal on channel one, with line-level and stereo auxiliary inputs on channel two. Music Ducking lowers channel two when a microphone signal is received on channel one, while the Feedback Eliminator helps suppress unwanted feedback. A mixed XLR thru output can feed another suitable speaker. This standard Thump215 model does not include the Bluetooth streaming, wireless speaker linking or application-specific voicing controls of the XT series. The cabinet can stand upright or serve as a floor monitor and has a pole-mount socket. Mackie expressly states that the standard model has no rigging points and is not suitable for suspension. This selection is one loudspeaker; stands, microphones, audio cables, carrying bags and a second speaker are separate.